1
Desk & office
iPad Pro 13-inch M4 folio desk easel
A low easel that holds a 13-inch iPad Pro M4 (about 281 × 215 × 5.1 mm) in its Smart Folio at 25 degrees for drawing, with a 218 mm ledge, a 10 mm Apple Pencil Pro well on the right, and a 14 mm USB-C cutout at the bottom. The back stay folds on a 6 mm pin. Print ledge and stay in PLA with 2 mm walls. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| Wall thickness | 2 mm |
| Back panel support length | 200 mm |
| Margin each side of ledge on panel width | 4 mm |
| Ledge (channel) length | 218 mm |
| Back wall (post) height of channel | 18 mm |
| Front lip height | 10 mm |
| Pencil well diameter | 10 mm |
| Pencil tube wall thickness | 3 mm |
| Pencil well depth | 22 mm |
| USB-C slot width | 14 mm |
| USB-C slot height | 6 mm |
| Stay bar thickness | 6 mm |
| Stay distance from each side edge | 15 mm |
| Clearance around iPad edge in slot | 0.5 mm |
Example prompt
Create an iPad Pro 13 M4 folio easel with a 218 mm ledge at 25 degrees, 10 mm Pencil well, 14 mm USB-C cutout, 6 mm folding stay, 2 mm walls.
Fit notes
11-inch folio easels leave 50 mm of the 13-inch hanging. Tell SpeakCAD the folio thickness, preview the easel in the browser, then download the STL.
Questions people ask about an iPad Pro 13-inch M4 folio desk easel
A low easel that holds a 13-inch iPad Pro M4 (about 281 × 215 × 5.1 mm) in its Smart Folio at 25 degrees for drawing, with a 218 mm ledge, a 10 mm Apple Pencil Pro well on the right, and a 14 mm USB-C cutout at the bottom. The back stay folds on a 6 mm pin. Print ledge and stay in PLA with 2 mm walls.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Logitech MX Master 3S mouse stand with USB-C slotReady-made, opens free. A parking dock that holds the Logitech MX Master 3S upright at the edge of a desk while it charges, keeping the mouse pad clear.Galaxy Tab S10 Ultra easel standReady-made, opens free. An easel that holds a Galaxy Tab S10 Ultra (about 326 × 208 × 5.4 mm) at 20 or 50 degrees for drawing, with a 210 mm ledge 10 mm deep and a folding 6 mm pin…Arturia MiniLab 3 angled feetReady-made, opens free. Replacement rear feet that put a MiniLab 3 at 8 degrees, 20 × 12 × 10 mm with the stock 4 mm pin.Mac Studio M4 under-desk trayReady-made, opens free. A ventilated tray that clamps a Mac Studio M4 (about 197 × 197 × 95 mm) under a 15–36 mm desk so the 120 mm rear exhaust stays open.Studio Display VESA cable channelReady-made, opens free. A channel that hides power and Thunderbolt behind a Studio Display on the official VESA mount so the cables follow the arm instead of hanging.Keycap storage tray with stem postsReady-made, opens free. A tray for sorting and storing loose MX-style keycaps on a grid of cross-shaped posts that hold each cap upright and prevent scuffing.