1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
COROS Vertix 2S charger dock
This is not a fixed STL. SpeakCAD generates the coros vertix 2s charger dock to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a coros vertix 2s charger dock is
A dock that holds a Vertix 2S on its clip at 20 degrees, 54 mm nest. Print in PLA.
Vertix 2 docks are a millimetre tight. Describe the clip in SpeakCAD, preview the dock in the browser without paying, then download the STL.
Example prompt
Model a Vertix 2S dock, 54 mm nest at 20 degrees, 10 mm clip slot, 1.6 mm walls.
People also search
vertix 2s stand stlcoros vertix 2s dock 3d printvertix 2s charger holdercoros vertix 2s stand 3d model
Questions people ask about a coros vertix 2s charger dock
A dock that holds a Vertix 2S on its clip at 20 degrees, 54 mm nest. Print in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Vertix 2S dock, 54 mm nest at 20 degrees, 10 mm clip slot, 1.6 mm walls.
Vertix 2 docks are a millimetre tight. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
iPad Air 11 inch drawing stand with Apple Pencil trayA low-angle drawing stand for the iPad Air 11 (247.6 x 178.5 x 6.1 mm) that props the tablet at 20 degrees like a drafting board, with a groove along the fro…AirPods 4 ANC desk charging standA small desk stand that holds an AirPods 4 ANC case (about 50 × 50 × 21 mm) at 20 degrees with the lid able to open.Focusrite Scarlett Solo 4th Gen angled standA 20 degree stand for a Scarlett Solo 4th Gen with a 14 mm USB-C slot and 10 mm foot recesses.MacBook Air M4 USB-C hub under-clamshell trayA 18 mm tray that sits under a closed MacBook Air M4 and holds an Anker or Anker-style 6-port hub so HDMI and SD do not hang off the left side.IKEA HEMNES nightstand 35 mm cable grommetA 35 mm grommet that drops into a drilled HEMNES nightstand top so a lamp and phone cable pass without a raw hole.Samsung Galaxy Buds 3 Pro desk wellA well that parks a Buds 3 Pro case (about 65 × 50 × 25 mm) at 15 degrees with a 12 mm USB-C slot.