1
Desk & office
Garmin Forerunner 970 bedside charger stand
A small bedside stand for a Garmin Forerunner 970 (about 47 mm) that holds the watch on its clip charger at 25 degrees so the display is readable from the pillow. The nest is 49 mm, a 10 mm slot at the bottom clears the clip, and a 50 × 16 mm pocket hides the USB brick. Print flat in PLA with 1.6 mm walls. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| X | 70 mm |
| Y | 50 mm |
| Z | 32 mm |
| wall thickness | 1.6 mm |
| shallow dish depth | 10 mm |
Example prompt
Design a Forerunner 970 bedside stand 70×50×32 mm with a 49 mm nest at 25 degrees, a 10 mm charger-clip slot, a 50×16 mm brick pocket and 1.6 mm walls.
Fit notes
Forerunner 965 stands are a millimetre too tight for the 970's new bezel. In SpeakCAD you enter the case size, preview the stand in the browser, then download the STL.
Questions people ask about a Garmin Forerunner 970 bedside charger stand
A small bedside stand for a Garmin Forerunner 970 (about 47 mm) that holds the watch on its clip charger at 25 degrees so the display is readable from the pillow. The nest is 49 mm, a 10 mm slot at the bottom clears the clip, and a 50 × 16 mm pocket hides the USB brick. Print flat in PLA with 1.6 mm walls.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Keycap storage tray with stem postsReady-made, opens free. A tray for sorting and storing loose MX-style keycaps on a grid of cross-shaped posts that hold each cap upright and prevent scuffing.Elgato Wave 3 microphone desk riser with cable slotReady-made, opens free. A riser that lifts the Elgato Wave:3 closer to mouth height without a boom arm.Galaxy Tab S10 Ultra easel standReady-made, opens free. An easel that holds a Galaxy Tab S10 Ultra (about 326 × 208 × 5.4 mm) at 20 or 50 degrees for drawing, with a 210 mm ledge 10 mm deep and a folding 6 mm pin…Arturia MiniLab 3 angled feetReady-made, opens free. Replacement rear feet that put a MiniLab 3 at 8 degrees, 20 × 12 × 10 mm with the stock 4 mm pin.Mac Studio M4 under-desk trayReady-made, opens free. A ventilated tray that clamps a Mac Studio M4 (about 197 × 197 × 95 mm) under a 15–36 mm desk so the 120 mm rear exhaust stays open.Mac mini M4 rear cable combReady-made, opens free. A comb that clips onto the rear edge of a Mac mini M4 and separates HDMI, two Thunderbolt cables and power so they do not unplug when you slide the mini.