1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Teenage Engineering OP-1 Field stand
This is not a fixed STL. SpeakCAD generates the teenage engineering op-1 field stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a teenage engineering op-1 field stand is
A low stand that holds an OP-1 Field at 12 degrees with a 14 mm USB-C slot and 3 mm side lips so it does not slide. Print in PLA.
The Field on a desk hides the screen. In SpeakCAD you confirm Field vs original, preview the stand in the browser without paying, then download the STL.
Example prompt
Model an OP-1 Field stand, 12 degrees, 14 mm USB-C, 3 mm lips, 2 mm walls.
People also search
op-1 field stand stlteenage engineering op1 stand 3d printop-1 field desk riserop1 field holder 3d model
Questions people ask about a teenage engineering op-1 field stand
A low stand that holds an OP-1 Field at 12 degrees with a 14 mm USB-C slot and 3 mm side lips so it does not slide. Print in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an OP-1 Field stand, 12 degrees, 14 mm USB-C, 3 mm lips, 2 mm walls.
The Field on a desk hides the screen. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
AirPods Pro 3 desk charging wellA well that parks an AirPods Pro 3 case (about 61 × 46 × 22 mm) on its USB-C or MagSafe side so the stem LEDs stay visible.Keychron Q2 HE wrist restA 20 mm wrist rest that matches a Keychron Q2 HE (about 360 × 150 mm) with two 8 × 2 mm magnet pockets for the case's front magnets.Adhesive desk cable clip setA set of low-profile clips that stick to the edge of a desk and hold charging cables.Amazon Echo Show 5 adjustable tilt desk standA stand that raises the Amazon Echo Show 5 and tilts it so the screen is visible when standing at a kitchen counter or desk.Aqara Cube T1 Pro desk cradleA 50 mm cradle that parks an Aqara Cube T1 Pro at 15 degrees so it does not roll off a desk, with a 1 mm lip.MacBook Pro 16-inch M4 Pro vertical standA vertical stand for a 16-inch MacBook Pro M4 Pro (about 16.8 mm closed, 356 mm wide) with a 18 × 358 mm slot, a 24 mm MagSafe cutout and a 160 × 110 mm base.