1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
iPad mini 7 bedside reading stand
This is not a fixed STL. SpeakCAD generates the ipad mini 7 bedside reading stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ipad mini 7 bedside reading stand is
A bedside stand that holds an iPad mini 7 (about 195 × 135 × 6.3 mm) at 40 degrees in portrait with a 14 mm USB-C slot and a 8 mm lip so a Folio case does not slide off. The well is 138 × 9 mm, the base is 160 × 90 mm, and a 20 mm thumb cutout on the right lets you pull the tablet one-handed. Print on its back in PLA with 2 mm walls.
Mini 6 stands sit the USB-C port on the wrong edge. Describe the case you use in SpeakCAD, preview the stand in the browser at no cost, then download the STL.
Example prompt
Design an iPad mini 7 reading stand 160×90×90 mm with a 138×9 mm well at 40 degrees, 8 mm lip, 14 mm USB-C slot, 20 mm thumb cutout and 2 mm walls.
People also search
ipad mini 7 stand stlipad mini 7 bedside stand 3d printipad mini 7 reading holderipad mini 7 folio stand 3d model
Questions people ask about a ipad mini 7 bedside reading stand
A bedside stand that holds an iPad mini 7 (about 195 × 135 × 6.3 mm) at 40 degrees in portrait with a 14 mm USB-C slot and a 8 mm lip so a Folio case does not slide off. The well is 138 × 9 mm, the base is 160 × 90 mm, and a 20 mm thumb cutout on the right lets you pull the tablet one-handed. Print on its back in PLA with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an iPad mini 7 reading stand 160×90×90 mm with a 138×9 mm well at 40 degrees, 8 mm lip, 14 mm USB-C slot, 20 mm thumb cutout and 2 mm walls.
Mini 6 stands sit the USB-C port on the wrong edge. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
IKEA EKET cube 40 mm cable grommetA 40 mm grommet for a drilled EKET cube so a router or game console can live inside with cables out the back.Garmin MARQ Carbon charger standA stand that holds a MARQ Carbon (about 46 mm) on its clip charger at 15 degrees so the titanium case is not on the nightstand.Samsung Galaxy Watch charger puck holder for deskAn upright holder for the round Samsung Galaxy Watch wireless charging puck, so a Galaxy Watch 6 or 7 sits on its side charging instead of lying face down on…Sony WH-1000XM6 under-desk hangerAn under-desk hanger for Sony WH-1000XM6 headphones (about 190 mm headband span) with a 22 mm saddle, a 6 mm clamp that grabs a 15–30 mm desktop, and a 10 mm…Universal Audio Volt 1 desk standA 15 degree stand for a Volt 1 with a 14 mm USB slot.MacBook Pro M4 left-side SD shelfA clip-on shelf that hangs from the left edge of a 14 or 16-inch MacBook Pro M4 and holds an SD reader flush with the HDMI port.