1
Desk & office
Logitech MX Master 3S mouse stand with USB-C slot
A parking dock that holds the Logitech MX Master 3S upright at the edge of a desk while it charges, keeping the mouse pad clear. The 3S is 124.9 x 84.3 x 51 mm, so the dock has a 52 x 86 mm contoured pocket 25 mm deep that matches the mouse's flat underside and thumb rest, with 1 mm clearance and a 12 x 8 mm slot at the front where the USB-C cable enters the nose of the mouse. The base is 90 x 70 mm, weighted by a hollow cavity and lined with 2 mm rubber pad recesses. Walls are 3 mm and it prints upright with the pocket facing up. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| base width (X) | 90 mm |
| base depth (Y) | 70 mm |
| base thickness | 8 mm |
| rubber pad recess diameter | 12 mm |
| rubber pad recess depth | 2 mm |
| inset from base corner | 12 mm |
| depth of pocket | 25 mm |
| wall thickness | 3 mm |
Example prompt
Design a vertical mouse dock for a Logitech MX Master 3S 124.9 x 84.3 x 51 mm with a contoured 52 x 86 mm pocket 25 mm deep and 1 mm clearance, a 12 x 8 mm front USB-C cable slot, a 90 x 70 mm weightable base with 2 mm rubber pad recesses and 3 mm walls.
Fit notes
Every mouse shell is different, so a dock built from the real profile holds the 3S without rocking. In SpeakCAD you describe the mouse, preview the stand in the browser, adapt it to an MX Master 2S or a Razer Basilisk V3 in the chat, and download the STL.
Questions people ask about a Logitech MX Master 3S mouse stand with USB-C slot
A parking dock that holds the Logitech MX Master 3S upright at the edge of a desk while it charges, keeping the mouse pad clear. The 3S is 124.9 x 84.3 x 51 mm, so the dock has a 52 x 86 mm contoured pocket 25 mm deep that matches the mouse's flat underside and thumb rest, with 1 mm clearance and a 12 x 8 mm slot at the front where the USB-C cable enters the nose of the mouse. The base is 90 x 70 mm, weighted by a hollow cavity and lined with 2 mm rubber pad recesses. Walls are 3 mm and it prints upright with the pocket facing up.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Elgato Stream Deck XL low-profile angled standReady-made, opens free. A single-piece stand that replaces the tall stock cradle of the Elgato Stream Deck XL with a slimmer 30 degree wedge.iPad Pro 11 M5 Magic Keyboard riserReady-made, opens free. A two-piece riser that lifts an 11-inch iPad Pro M5 in its Magic Keyboard (about 250 × 178 × 16 mm closed) by 40 mm so a USB-C hub can sit underneath.Novation Launchkey Mini MK4 standReady-made, opens free. A 15 degree stand for a Launchkey Mini MK4 with a 14 mm USB-C slot and a 180 mm span.MacBook Pro 14 M4 SD-reader under-stand shelfReady-made, opens free. A 20 mm shelf that sits under a 14-inch MacBook Pro stand and holds an SD card reader plus two CFexpress cards in labelled wells.HomePod 2nd gen bookshelf isolation standReady-made, opens free. A 20 mm isolation stand under a full-size HomePod 2nd gen (about 168 mm diameter, 142 mm tall) so the bass does not buzz a bookshelf.Two-piece tablet stand with adjustable angleReady-made, opens free. A cradle and a folding prop that together hold a tablet at 30, 45 or 60 degrees.