1
Desk & office
Elgato Stream Deck XL low-profile angled stand
A single-piece stand that replaces the tall stock cradle of the Elgato Stream Deck XL with a slimmer 30 degree wedge. The XL body is 182 x 112 x 34 mm, so the stand has a 183 x 113 mm recess 6 mm deep with 0.5 mm clearance, a 3 mm lip at the bottom edge to stop the deck sliding forward and a 45 mm gap in the back wall so the USB-C cable routes straight down to the desk. Underneath, four 10 mm pockets take rubber feet and the hollow interior can be filled with coins or steel shot to weight it. Walls are 3 mm and the stand prints on its flat back with no supports. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| pocket depth for device body | 6 mm |
| wall thickness | 3 mm |
| front lip height | 3 mm |
| rear cable gap width | 45 mm |
| rear cable gap height | 12 mm |
| depth of base on the desk | 170 mm |
| height of the flat base block | 14 mm |
Example prompt
Design a 30 degree angled desk stand for an Elgato Stream Deck XL 182 x 112 x 34 mm with a 183 x 113 x 6 mm recess and 0.5 mm clearance, a 3 mm front lip, a 45 mm rear cable gap, 3 mm walls, a hollow weightable interior and four 10 mm rubber foot pockets underneath.
Fit notes
Stand angle is personal and depends on your desk height, which a generic download cannot know. In SpeakCAD you describe the deck, preview the stand in the browser, change the angle or adapt to a Stream Deck MK.2 or Neo in the chat, and download the STL.
Questions people ask about an Elgato Stream Deck XL low-profile angled stand
A single-piece stand that replaces the tall stock cradle of the Elgato Stream Deck XL with a slimmer 30 degree wedge. The XL body is 182 x 112 x 34 mm, so the stand has a 183 x 113 mm recess 6 mm deep with 0.5 mm clearance, a 3 mm lip at the bottom edge to stop the deck sliding forward and a 45 mm gap in the back wall so the USB-C cable routes straight down to the desk. Underneath, four 10 mm pockets take rubber feet and the hollow interior can be filled with coins or steel shot to weight it. Walls are 3 mm and the stand prints on its flat back with no supports.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Novation Launchkey Mini MK4 standReady-made, opens free. A 15 degree stand for a Launchkey Mini MK4 with a 14 mm USB-C slot and a 180 mm span.MacBook Pro 14 M4 SD-reader under-stand shelfReady-made, opens free. A 20 mm shelf that sits under a 14-inch MacBook Pro stand and holds an SD card reader plus two CFexpress cards in labelled wells.HomePod 2nd gen bookshelf isolation standReady-made, opens free. A 20 mm isolation stand under a full-size HomePod 2nd gen (about 168 mm diameter, 142 mm tall) so the bass does not buzz a bookshelf.Two-piece tablet stand with adjustable angleReady-made, opens free. A cradle and a folding prop that together hold a tablet at 30, 45 or 60 degrees.Elgato Stream Deck MK.2 under-monitor mountReady-made, opens free. A bracket that hangs an Elgato Stream Deck MK.2 below the bottom edge of a monitor so it stays in reach without a footprint on the desk.Sony WH-1000XM6 under-desk hangerReady-made, opens free. An under-desk hanger for Sony WH-1000XM6 headphones (about 190 mm headband span) with a 22 mm saddle, a 6 mm clamp that grabs a 15–30 mm desktop, and a 10 mm…