1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Sony WH-1000XM6 under-desk hanger
This is not a fixed STL. SpeakCAD generates the sony wh-1000xm6 under-desk hanger to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a sony wh-1000xm6 under-desk hanger is
An under-desk hanger for Sony WH-1000XM6 headphones (about 190 mm headband span) with a 22 mm saddle, a 6 mm clamp that grabs a 15–30 mm desktop, and a 10 mm hook for the USB-C cable. The clamp uses an M6 thumb screw against a 20 × 8 mm pad so it does not mark the desk. Print the hanger and pad in PETG with 2 mm walls.
XM5 hangers pinch the XM6's wider hinge. Describe the desk thickness in SpeakCAD, preview the clamp in the browser for free, then download the STL.
Example prompt
Create a WH-1000XM6 under-desk hanger with a 22 mm saddle, a clamp for 15–30 mm desks using an M6 thumb screw and 20×8 mm pad, a 10 mm cable hook and 2 mm PETG walls.
People also search
sony xm6 headphone hanger stlwh-1000xm6 under desk hook 3d printsony xm6 desk hangerwh1000xm6 headphone holder 3d model
Questions people ask about a sony wh-1000xm6 under-desk hanger
An under-desk hanger for Sony WH-1000XM6 headphones (about 190 mm headband span) with a 22 mm saddle, a 6 mm clamp that grabs a 15–30 mm desktop, and a 10 mm hook for the USB-C cable. The clamp uses an M6 thumb screw against a 20 × 8 mm pad so it does not mark the desk. Print the hanger and pad in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a WH-1000XM6 under-desk hanger with a 22 mm saddle, a clamp for 15–30 mm desks using an M6 thumb screw and 20×8 mm pad, a 10 mm cable hook and 2 mm PETG walls.
XM5 hangers pinch the XM6's wider hinge. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
ZSA Moonlander tenting legs setA set of four screw-in tenting legs for a ZSA Moonlander that replace the stock 8 mm feet with 15, 25 and 40 mm options.NuPhy Air75 V3 tenting feetA set of 8 degree tenting feet that replace Air75 V3 stock feet, 20 × 10 × 8 mm with the official pin.Studio Display USB-C hub shelfA 18 mm shelf that hangs from the Studio Display's rear Thunderbolt cable and holds a USB-C hub so Ethernet and SD do not hang off the single upstream port.IKEA KALLAX cube 50 mm cable passA 50 mm pass-through for a KALLAX cube used as a printer or game stand so power can exit the back without a raw hole.Framework 16 speaker-module stand feetFeet that lift a Framework 16 8 mm when the speaker modules are in so the down-firing drivers clear a desk.Samsung Galaxy Z Flip 6 desk stand for Flex modeA desk dock for the Samsung Galaxy Z Flip 6 that cradles the lower half so the phone sits in Flex mode with the top screen angled toward you for video calls…