1
Desk & office
Mouse bungee with weighted base
A desk accessory that lifts a wired mouse cable off the mat so it never snags or drags. A flexible arm 120 mm tall ends in a 6 mm clip with 0.3 mm clearance for the cable, and the heavy base is a 90 mm disc 15 mm thick with a hollow underside that accepts steel washers for weight before a snap-in cover closes it. The arm is 2 mm thick so it flexes and springs back; print it upright with the arm vertical. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| base diameter | 90 mm |
| base thickness | 15 mm |
| side wall left around cavity | 3 mm |
| hollow depth from bottom | 10 mm |
| groove depth | 1 mm |
| groove height | 1.5 mm |
| fit clearance | 0.3 mm |
| flex direction thickness | 2 mm |
| lateral width | 8 mm |
| total height | 120 mm |
| forward curve offset | 30 mm |
| opening slot width for snapping cable in | 3.4 mm |
Example prompt
Design a mouse bungee with a 90 mm diameter base 15 mm thick, hollow underside 10 mm deep with a snap-in cover, a 2 mm thick flexible arm 120 mm tall curving forward 30 mm, ending in a 6 mm cable clip with 0.3 mm clearance.
Fit notes
Cable thickness and preferred arm height are personal, so a bungee generated in SpeakCAD around your mouse cable diameter holds without pinching or slipping. Look at it in the browser for free, shorten the arm or widen the weight cavity in a follow-up, and download the STL when it suits your desk layout.
Questions people ask about a mouse bungee with weighted base
A desk accessory that lifts a wired mouse cable off the mat so it never snags or drags. A flexible arm 120 mm tall ends in a 6 mm clip with 0.3 mm clearance for the cable, and the heavy base is a 90 mm disc 15 mm thick with a hollow underside that accepts steel washers for weight before a snap-in cover closes it. The arm is 2 mm thick so it flexes and springs back; print it upright with the arm vertical.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
AKAI MPK Mini Plus standReady-made, opens free. A 12 degree stand for an MPK Mini Plus that clears the extra drum pads, 220 mm span in two halves.Mac mini M4 under-monitor shelfReady-made, opens free. A shelf that hides a Mac mini M4 (about 127 × 127 × 50 mm) under a monitor with 20 mm side vents and a 16 mm power/Thunderbolt cutout at the back.Thunderbolt 5 dock MacBook under-standReady-made, opens free. A 30 mm stand that lifts a closed MacBook Air or 14-inch Pro and hides a Thunderbolt 5 dock (about 200 × 80 × 28 mm) underneath so the single cable is the on…Adhesive desk cable clip setReady-made, opens free. A set of low-profile clips that stick to the edge of a desk and hold charging cables.Logitech Brio webcam clip for thin bezel monitorsReady-made, opens free. A replacement clip for the Logitech Brio 4K webcam that grips a monitor with a bezel under 6 mm, which the stock mount slides off.iPad Pro 11 M5 Magic Keyboard riserReady-made, opens free. A two-piece riser that lifts an 11-inch iPad Pro M5 in its Magic Keyboard (about 250 × 178 × 16 mm closed) by 40 mm so a USB-C hub can sit underneath.