1
Desk & office
Adhesive desk cable clip set
A set of low-profile clips that stick to the edge of a desk and hold charging cables. Each clip has a C-shaped opening sized to the cable diameter with 0.4 mm clearance, a 20 x 15 mm flat base for a strip of double-sided tape, and a 1.2 mm flexible lip that lets a cable snap in and out. Print them lying on the base; the 3 mm body stays flexible. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| cable diameter | 4.5 mm |
| clearance around cable | 0.4 mm |
| clip wall thickness | 1.5 mm |
| flexible lip width (gap opening) | 1.2 mm |
| base width (X) | 20 mm |
| base depth (Y) | 15 mm |
| base height (Z) | 3 mm |
| height of clip channel above base | 8 mm |
| number of clips | 5 |
Example prompt
Design a set of five desk cable clips, each a C-shaped holder for a 4.5 mm cable with 0.4 mm clearance and a 1.2 mm flexible lip, on a 20 x 15 x 3 mm base for adhesive tape, arranged flat on a plate for printing together.
Fit notes
Cables run from 3 mm earbuds to 6 mm braided chargers, and a clip generated to each one grips firmly without deforming the jacket. Give SpeakCAD the cable diameters and how many clips you need, preview the set in the browser, ask for a two-cable or three-cable clip in the same chat, and download when the set is complete.
Questions people ask about an adhesive desk cable clip set
A set of low-profile clips that stick to the edge of a desk and hold charging cables. Each clip has a C-shaped opening sized to the cable diameter with 0.4 mm clearance, a 20 x 15 mm flat base for a strip of double-sided tape, and a 1.2 mm flexible lip that lets a cable snap in and out. Print them lying on the base; the 3 mm body stays flexible.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Oura Ring charger puck desk dock with ring restReady-made, opens free. A small desk dock that holds the round Oura Ring charger, roughly 50 mm across on Gen3 and Ring 4, and raises it so the ring sits on the post at a comfortabl…Whoop 5.0 battery pack nightstand dockReady-made, opens free. A nightstand dock that holds a Whoop 5.0 battery pack (about 29 × 22 × 8 mm) on its contacts with a 30 × 23 mm well 6 mm deep and a 4 mm USB-C slot at the back.COROS Vertix 2S charger dockReady-made, opens free. A dock that holds a Vertix 2S on its clip at 20 degrees, 54 mm nest.MacBook Air 15-inch M4 clamshell standReady-made, opens free. A clamshell stand for a 15-inch MacBook Air M4 (about 11.5 mm closed, 340 mm wide) that lifts the hinge 20 mm so air can exit and a USB-C hub can sit underne…Studio Display USB-C hub shelfReady-made, opens free. A 18 mm shelf that hangs from the Studio Display's rear Thunderbolt cable and holds a USB-C hub so Ethernet and SD do not hang off the single upstream port.Pen cup with sloped compartmentsReady-made, opens free. A desk pen holder divided into three angled compartments so pens, markers and scissors each lean forward and stay easy to grab.