1
Desk & office
Whoop 5.0 battery pack nightstand dock
A nightstand dock that holds a Whoop 5.0 battery pack (about 29 × 22 × 8 mm) on its contacts with a 30 × 23 mm well 6 mm deep and a 4 mm USB-C slot at the back. A 12 mm thumb scoop lets you pull the pack off without waking anyone, and a 60 × 40 mm base keeps it from tipping. Print in one piece in PLA with 1.2 mm walls. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| length (X) | 60 mm |
| width (Y) | 40 mm |
| height (Z) | 14 mm |
| depth of well | 6 mm |
| minimum wall thickness | 1.2 mm |
| slot width (typical USB-C connector clearance) | 9 mm |
| slot height | 4 mm |
| scoop radius | 12 mm |
Example prompt
Model a Whoop 5.0 battery dock 60×40×14 mm with a 30×23×6 mm well, 4 mm USB-C rear slot, 12 mm thumb scoop and 1.2 mm walls.
Fit notes
Whoop 4.0 docks leave the 5.0 pack rattling. Describe the pack you measured in SpeakCAD, preview the dock in the browser, then download the STL.
Questions people ask about a Whoop 5.0 battery pack nightstand dock
A nightstand dock that holds a Whoop 5.0 battery pack (about 29 × 22 × 8 mm) on its contacts with a 30 × 23 mm well 6 mm deep and a 4 mm USB-C slot at the back. A 12 mm thumb scoop lets you pull the pack off without waking anyone, and a 60 × 40 mm base keeps it from tipping. Print in one piece in PLA with 1.2 mm walls.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Oura Ring charger puck desk dock with ring restReady-made, opens free. A small desk dock that holds the round Oura Ring charger, roughly 50 mm across on Gen3 and Ring 4, and raises it so the ring sits on the post at a comfortabl…AirPods 4 ANC desk charging standReady-made, opens free. A small desk stand that holds an AirPods 4 ANC case (about 50 × 50 × 21 mm) at 20 degrees with the lid able to open.Polar Vantage V3 charger cradleReady-made, opens free. A cradle that holds a Vantage V3 on its four-pogo cable at 15 degrees, 48 mm nest.MacBook Pro 14-inch M4 MagSafe cable holderReady-made, opens free. A desk clip that parks a MagSafe 3 cable at the exact height of a 14-inch MacBook Pro M4 (about 15.5 mm thick) so the connector does not droop and scratch th…iPad Pro 13-inch M4 folio desk easelReady-made, opens free. A low easel that holds a 13-inch iPad Pro M4 (about 281 × 215 × 5.1 mm) in its Smart Folio at 25 degrees for drawing, with a 218 mm ledge, a 10 mm Apple Penc…Sticky note caddy with pen grooveReady-made, opens free. A compact holder that keeps a 76 mm square pad of sticky notes flat and a pen in a groove alongside.