Desk & office

Angled desk phone stand with cable slot

A 60 degree cradle that holds a phone upright for video calls while a charging cable passes up through a slot in the base. The pocket is 12 mm deep with a 4 mm front lip so the phone leans without slipping, the slot is 8 mm wide to clear a USB-C plug body, and the rear leg is a hollow triangle so the stand prints upright with 2 mm walls and no supports.

Phone cases vary a lot in thickness, and stand files rarely account for yours. Measure the phone in its case, hand the numbers to SpeakCAD, and it generates a pocket that fits with just enough play. Preview the stand in the browser free, switch the cable slot to the side, and download the STL when it is dialled in.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Make a desk phone stand tilted 60 degrees with a pocket 85 mm wide, 12 mm deep and 12 mm thick, a 4 mm front lip, an 8 mm cable slot through the base, hollow triangular rear leg with 2 mm walls, footprint about 90 x 100 mm.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More desk & office

Slim bookend pair with anti-slip baseA pair of L-shaped bookends that keep manuals and notebooks upright on a desk or open shelf.Kindle Paperwhite desk reading stand with USB-C cable slotA reclining stand that holds a Kindle Paperwhite (176.7 x 127.6 x 7.8 mm for the 2024 model, 174.2 x 124.6 x 8.1 mm for the 2021) at 60 degrees for hands-fre…Oura Ring charger puck desk dock with ring restA small desk dock that holds the round Oura Ring charger, roughly 50 mm across on Gen3 and Ring 4, and raises it so the ring sits on the post at a comfortabl…Anker 7-in-1 USB-C hub under-desk clip holderA holder that screws under the desk edge and grips an Anker 7-in-1 USB-C hub so its ports face forward within reach.Vertical laptop stand for closed-lid dockingA weighted-look holder that stores a closed laptop on its edge beside a monitor.Two-piece tablet stand with adjustable angleA cradle and a folding prop that together hold a tablet at 30, 45 or 60 degrees.

Make your angled desk phone stand with cable slot now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.