1
Desk & office
Mac Studio M4 under-desk tray
A ventilated tray that clamps a Mac Studio M4 (about 197 × 197 × 95 mm) under a 15–36 mm desk so the 120 mm rear exhaust stays open. The well is 200 × 200 × 40 mm with 12 mm side vents and an M6 clamp pair. Print in two PETG halves. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| Wall thickness | 2.4 mm |
| Tray width | 200 mm |
| Tray depth | 200 mm |
| Tray height | 40 mm |
| Vent hole diameter | 12 mm |
| Max desk thickness | 36 mm |
| Clamp extrusion width | 30 mm |
| M6 bolt clearance diameter | 6.4 mm |
| Clearance around M6 bolt | 0.3 mm |
| Clearance around M6 nut | 0.25 mm |
Example prompt
Model a Mac Studio M4 under-desk tray 200×200×40 mm, 12 mm vents, clamp for 15–36 mm desks, two PETG halves, 2.4 mm walls.
Fit notes
A Studio on the desk is 95 mm of wasted monitor height. Describe the desk thickness in SpeakCAD, preview the tray in the browser, then download the STL.
Questions people ask about a Mac Studio M4 under-desk tray
A ventilated tray that clamps a Mac Studio M4 (about 197 × 197 × 95 mm) under a 15–36 mm desk so the 120 mm rear exhaust stays open. The well is 200 × 200 × 40 mm with 12 mm side vents and an M6 clamp pair. Print in two PETG halves.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
MacBook Air 13-inch M4 vertical dockReady-made, opens free. A vertical dock that holds a 13-inch MacBook Air M4 (about 11.3 mm closed, 304 mm wide) on its side so MagSafe and the two Thunderbolt ports stay clear.Studio Display USB-C hub shelfReady-made, opens free. A 18 mm shelf that hangs from the Studio Display's rear Thunderbolt cable and holds a USB-C hub so Ethernet and SD do not hang off the single upstream port.Pen cup with sloped compartmentsReady-made, opens free. A desk pen holder divided into three angled compartments so pens, markers and scissors each lean forward and stay easy to grab.Samsung Galaxy Z Flip 6 desk stand for Flex modeReady-made, opens free. A desk dock for the Samsung Galaxy Z Flip 6 that cradles the lower half so the phone sits in Flex mode with the top screen angled toward you for video calls…Garmin Fenix 8 charger cable dockReady-made, opens free. A desk dock that holds a Garmin Fenix 8 (51 mm case) face-out while the official clip charger clamps the back.Garmin Instinct 3 charger-clip dockReady-made, opens free. A dock that holds an Instinct 3 on its clip charger at 20 degrees, 48 mm nest.