1
Desk & office
Galaxy S25 Ultra S Pen desk dock
A nightstand dock for a Samsung Galaxy S25 Ultra (about 163 × 79 × 8.2 mm) that holds the phone at 50 degrees and parks the S Pen in a 7.2 mm square well 45 mm deep. A 14 mm USB-C channel exits the back, the phone well is 81 × 11 mm with 0.4 mm clearance for a slim case, and a 12 mm thumb scoop on the right edge lets you draw the pen out. The base is 120 × 85 mm and prints flat in PLA with 2 mm walls. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| width | 120 mm |
| depth | 85 mm |
| height | 75 mm |
| wall thickness | 2 mm |
| slot length (along phone width) | 81 mm |
| nominal slot width (phone thickness) | 11 mm |
| clearance | 0.4 mm |
| how deep the slot cuts into the back support | 30 mm |
| depth of channel cut from back | 20 mm |
| square side (with small clearance built in) | 7.2 mm |
| depth of pen well | 45 mm |
| 12mm diameter thumb scoop radius | 6 mm |
Example prompt
Create a Galaxy S25 Ultra desk dock 120×85×75 mm with an 81×11 mm phone well at 50 degrees, 0.4 mm clearance, a 14 mm USB-C rear channel, and a 7.2 mm square S Pen well 45 mm deep with a 12 mm thumb scoop. 2 mm walls.
Fit notes
S24 Ultra docks put the pen well on the wrong corner after Samsung moved the slot. Describe the phone and pen you measured in SpeakCAD, preview the dock in the browser, and download the STL.
Questions people ask about a Galaxy S25 Ultra S Pen desk dock
A nightstand dock for a Samsung Galaxy S25 Ultra (about 163 × 79 × 8.2 mm) that holds the phone at 50 degrees and parks the S Pen in a 7.2 mm square well 45 mm deep. A 14 mm USB-C channel exits the back, the phone well is 81 × 11 mm with 0.4 mm clearance for a slim case, and a 12 mm thumb scoop on the right edge lets you draw the pen out. The base is 120 × 85 mm and prints flat in PLA with 2 mm walls.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Quad Lock desk dock stand with USB-C cable slotReady-made, opens free. A desk stand with a Quad Lock style twist-lock recess on a 60 degree face, so a phone in a Quad Lock case clicks on in portrait or landscape and charges thro…Focusrite Scarlett 2i2 4th Gen angled desk standReady-made, opens free. A desk stand that tilts a Focusrite Scarlett 2i2 4th Gen or Scarlett Solo (the 2i2 is 180 x 47.5 x 117 mm) back 25 degrees so the gain halos and Air button f…COROS Pace 3 charger clip dockReady-made, opens free. A bedside dock that holds a COROS Pace 3 (about 42 mm) on its pogo-clip charger at 20 degrees.Elgato Facecam MK.2 privacy shutterReady-made, opens free. A sliding shutter that covers a Facecam MK.2 lens, 30 × 18 × 6 mm with a 1 mm track.Apple Pencil Pro MagSafe pair trayReady-made, opens free. A tray that parks an Apple Pencil Pro and a USB-C Pencil side by side with 9 mm saddles and a 12 mm cap well.Mac Studio M4 Thunderbolt cable combReady-made, opens free. A comb that sits on the rear I/O of a Mac Studio M4 and separates four Thunderbolt 5 cables plus HDMI so they unplug one at a time.