1
Desk & office
Slim bookend pair with anti-slip base
A pair of L-shaped bookends that keep manuals and notebooks upright on a desk or open shelf. Each bookend has a 150 mm tall upright, a 120 mm deep base plate only 3 mm thick so books slide over it, and a 15 mm rear return that stiffens the corner. A 6 mm fillet at the base-to-upright joint takes the bending load, and four 8 mm pockets underneath accept rubber bumpers. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| upright height (Z) | 120 mm |
| upright thickness (Y) | 4 mm |
| base width (X) - matches upright | 150 mm |
| base depth (Y) | 120 mm |
| base thickness (Z) | 3 mm |
| rear return height (Z) | 15 mm |
| rear return thickness (Y) | 4 mm |
| base-joint fillet radius | 6 mm |
| bumper pocket diameter | 8 mm |
| pocket depth (base_t - 1mm floor) | 2 mm |
| inset from edges for pocket centers | 20 mm |
Example prompt
Create a pair of L-shaped bookends each with a 150 x 120 mm upright 4 mm thick, a 120 mm deep base plate 3 mm thick, a 15 mm rear return, 6 mm fillet at the base joint, four 8 mm pockets underneath for rubber bumpers.
Fit notes
Tall art books or short paperbacks need different upright heights, and a shelf that is 180 mm deep needs a shorter base than one at 300 mm. Tell SpeakCAD those dimensions, preview the pair in the browser, ask for a cut-out monogram or a slot for a pen, and download the STL once the proportions match your shelf.
Questions people ask about a slim bookend pair with anti-slip base
A pair of L-shaped bookends that keep manuals and notebooks upright on a desk or open shelf. Each bookend has a 150 mm tall upright, a 120 mm deep base plate only 3 mm thick so books slide over it, and a 15 mm rear return that stiffens the corner. A 6 mm fillet at the base-to-upright joint takes the bending load, and four 8 mm pockets underneath accept rubber bumpers.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Keychron Q8 Max split palm restReady-made, opens free. A split palm rest for a Q8 Max Alice with two 8 × 2 mm magnet pockets matching the case.MagSafe, Apple Watch and AirPods trio standReady-made, opens free. A nightstand stand that holds a MagSafe puck at 60 degrees, an Apple Watch Ultra / Series puck in a 28 mm bore, and an AirPods 4 case in a 52 mm well.Magic Keyboard with Numeric Keypad angled trayReady-made, opens free. A 6 degree tray for the Magic Keyboard with Numeric Keypad (about 418 × 115 × 11 mm) so the larger board matches a Magic Trackpad wedge.Anker MagGo Qi2 charger puck desk standReady-made, opens free. An angled desk stand for the round Anker MagGo Qi2 wireless charging pad, so a Qi2 phone such as an iPhone 16 or Galaxy S25 stands at 60 degrees for video ca…iPhone 17 Air MagSafe wallet standReady-made, opens free. A slim nightstand stand that an iPhone 17 Air (about 147 × 72 × 5.6 mm) snaps onto at 60 degrees for StandBy, with a 4 mm pocket behind the MagSafe disc for…COROS Pace 3 charger clip dockReady-made, opens free. A bedside dock that holds a COROS Pace 3 (about 42 mm) on its pogo-clip charger at 20 degrees.