Desk & office

Anker MagGo Qi2 charger puck desk stand

An angled desk stand for the round Anker MagGo Qi2 wireless charging pad, so a Qi2 phone such as an iPhone 16 or Galaxy S25 stands at 60 degrees for video calls while charging. The pad measures roughly 60 mm across on current models, so the pocket is 60.5 mm with a 2 mm lip and a 5 mm cable channel running out of the back, and the 95 x 75 mm base is wide enough to stop a Pro Max phone tipping it. Walls are 3 mm and it prints upright with the pocket facing forward.

Third-party pucks are all a different size from the Apple original, and most downloaded stands only fit that one. In SpeakCAD you type the diameter and thickness of the pad you own, preview the stand free in the browser, refine the angle or lip in the chat, then download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Model a desk charging stand with a 60.5 mm diameter, 7 mm deep pocket for an Anker MagGo Qi2 pad tilted 60 degrees, a 2 mm retaining lip, a 5 mm cable channel exiting the rear, a 95 x 75 x 12 mm base and 3 mm walls.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More desk & office

Desk tray for paper clips and binder clipsA shallow sorting tray that separates paper clips, binder clips of two sizes and push pins into distinct wells.Kindle Paperwhite desk reading stand with USB-C cable slotA reclining stand that holds a Kindle Paperwhite (176.7 x 127.6 x 7.8 mm for the 2024 model, 174.2 x 124.6 x 8.1 mm for the 2021) at 60 degrees for hands-fre…Oura Ring charger puck desk dock with ring restA small desk dock that holds the round Oura Ring charger, roughly 50 mm across on Gen3 and Ring 4, and raises it so the ring sits on the post at a comfortabl…Anker 7-in-1 USB-C hub under-desk clip holderA holder that screws under the desk edge and grips an Anker 7-in-1 USB-C hub so its ports face forward within reach.Angled desk phone stand with cable slotA 60 degree cradle that holds a phone upright for video calls while a charging cable passes up through a slot in the base.Angled business card holder for deskA tilted display block that fans a stack of up to 30 business cards forward so visitors can take one cleanly.

Make your anker maggo qi2 charger puck desk stand now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.