1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Mac mini M4 under-monitor shelf
This is not a fixed STL. SpeakCAD generates the mac mini m4 under-monitor shelf to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a mac mini m4 under-monitor shelf is
A shelf that hides a Mac mini M4 (about 127 × 127 × 50 mm) under a monitor with 20 mm side vents and a 16 mm power/Thunderbolt cutout at the back. Two 4.5 mm holes sit on 80 mm centres, or it can clamp a 15–30 mm riser. Print in PETG.
The mini on the desk is a cable nest. Tell SpeakCAD the riser thickness, preview the shelf in the browser for free, then download the STL.
Example prompt
Create a Mac mini M4 shelf 140×140×20 mm with 20 mm side vents, a 16 mm rear cable cutout and two 4.5 mm holes on 80 mm centres, 2 mm PETG.
People also search
mac mini m4 stand stlmac mini m4 under monitor 3d printmac mini m4 shelfapple mac mini m4 holder 3d model
Questions people ask about a mac mini m4 under-monitor shelf
A shelf that hides a Mac mini M4 (about 127 × 127 × 50 mm) under a monitor with 20 mm side vents and a 16 mm power/Thunderbolt cutout at the back. Two 4.5 mm holes sit on 80 mm centres, or it can clamp a 15–30 mm riser. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Mac mini M4 shelf 140×140×20 mm with 20 mm side vents, a 16 mm rear cable cutout and two 4.5 mm holes on 80 mm centres, 2 mm PETG.
The mini on the desk is a cable nest. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
IKEA EKET cube 40 mm cable grommetA 40 mm grommet for a drilled EKET cube so a router or game console can live inside with cables out the back.Garmin MARQ Carbon charger standA stand that holds a MARQ Carbon (about 46 mm) on its clip charger at 15 degrees so the titanium case is not on the nightstand.Samsung Galaxy Watch charger puck holder for deskAn upright holder for the round Samsung Galaxy Watch wireless charging puck, so a Galaxy Watch 6 or 7 sits on its side charging instead of lying face down on…Sony WH-1000XM6 under-desk hangerAn under-desk hanger for Sony WH-1000XM6 headphones (about 190 mm headband span) with a 22 mm saddle, a 6 mm clamp that grabs a 15–30 mm desktop, and a 10 mm…Focusrite Scarlett Solo 4th Gen angled standA 20 degree stand for a Scarlett Solo 4th Gen with a 14 mm USB-C slot and 10 mm foot recesses.MacBook Pro M4 left-side SD shelfA clip-on shelf that hangs from the left edge of a 14 or 16-inch MacBook Pro M4 and holds an SD reader flush with the HDMI port.