1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
MacBook Air 15 M4 MagSafe right-side clip
This is not a fixed STL. SpeakCAD generates the macbook air 15 m4 magsafe right-side clip to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a macbook air 15 m4 magsafe right-side clip is
A clip that hangs from the right edge of a 15-inch MacBook Air M4 and holds the MagSafe 3 cable at chassis height so the tip does not scratch the aluminium. The lip is 4 mm, the saddle is 13 mm ID, and the body is 50 × 22 × 12 mm. Print in PETG with 1.6 mm walls.
A desk-edge MagSafe holder is in the wrong place when the Air is closed. In SpeakCAD you pick 13 or 15, preview the clip in the browser at no cost, then download the STL.
Example prompt
Design a MacBook Air 15 M4 MagSafe clip 50×22×12 mm, 4 mm chassis lip, 13 mm saddle, 1.6 mm PETG.
People also search
macbook air 15 magsafe clip stlair 15 m4 magsafe holder 3d printmacbook air magsafe side clip15 inch air magsafe clip 3d model
Questions people ask about a macbook air 15 m4 magsafe right-side clip
A clip that hangs from the right edge of a 15-inch MacBook Air M4 and holds the MagSafe 3 cable at chassis height so the tip does not scratch the aluminium. The lip is 4 mm, the saddle is 13 mm ID, and the body is 50 × 22 × 12 mm. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a MacBook Air 15 M4 MagSafe clip 50×22×12 mm, 4 mm chassis lip, 13 mm saddle, 1.6 mm PETG.
A desk-edge MagSafe holder is in the wrong place when the Air is closed. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Suunto Vertical charger-cable standA stand that holds a Suunto Vertical on its pogo cable at 25 degrees, 50 mm nest.Mac Studio M4 under-desk trayA ventilated tray that clamps a Mac Studio M4 (about 197 × 197 × 95 mm) under a 15–36 mm desk so the 120 mm rear exhaust stays open.AirPods Pro 3 desk charging wellA well that parks an AirPods Pro 3 case (about 61 × 46 × 22 mm) on its USB-C or MagSafe side so the stem LEDs stay visible.Keychron V1 Max tenting feetA set of screw-in tenting feet for a V1 Max that replace the stock 8 mm feet with 12, 20 and 30 mm options.Sloped wrist rest for mechanical keyboardA palm rest that matches the front height of a mechanical keyboard so your wrists stay level while typing.Akai MPK Mini MK3 keyboard stand with laptop shelfA two-tier stand that lifts an Akai MPK Mini MK3 or MPK Mini Plus (318 x 181 x 44 mm) 20 mm off the desk at a 10 degree angle and raises a 13 to 16 inch lapt…