1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Apple Watch Series 11 nightstand angle wedge
This is not a fixed STL. SpeakCAD generates the apple watch series 11 nightstand angle wedge to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a apple watch series 11 nightstand angle wedge is
A 15 degree wedge that sits under an official Series 11 charger puck so the 46 mm watch face is readable from the pillow. The pad is 70 × 50 × 14 mm with a 28 mm puck recess 4 mm deep and a 6 mm cable slot. Print in PLA with a 1 mm TPU face, or all PLA.
The travel charger case is a different part and sits flat. In SpeakCAD you set 10 or 15 degrees, preview the wedge in the browser without paying, then download the STL.
Example prompt
Model a Series 11 nightstand wedge 70×50×14 mm, 15 degrees, 28 mm puck recess 4 mm deep, 6 mm cable slot, 1.6 mm walls.
People also search
apple watch series 11 wedge stlwatch series 11 nightstand stand 3d printseries 11 charger angleapple watch 11 bedside wedge 3d model
Questions people ask about a apple watch series 11 nightstand angle wedge
A 15 degree wedge that sits under an official Series 11 charger puck so the 46 mm watch face is readable from the pillow. The pad is 70 × 50 × 14 mm with a 28 mm puck recess 4 mm deep and a 6 mm cable slot. Print in PLA with a 1 mm TPU face, or all PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Series 11 nightstand wedge 70×50×14 mm, 15 degrees, 28 mm puck recess 4 mm deep, 6 mm cable slot, 1.6 mm walls.
The travel charger case is a different part and sits flat. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Focusrite Scarlett 2i2 4th Gen angled desk standA desk stand that tilts a Focusrite Scarlett 2i2 4th Gen or Scarlett Solo (the 2i2 is 180 x 47.5 x 117 mm) back 25 degrees so the gain halos and Air button f…Garmin Instinct 3 charger-clip dockA dock that holds an Instinct 3 on its clip charger at 20 degrees, 48 mm nest.Mac mini M4 under-monitor shelfA shelf that hides a Mac mini M4 (about 127 × 127 × 50 mm) under a monitor with 20 mm side vents and a 16 mm power/Thunderbolt cutout at the back.AirPods Pro 3 desk charging wellA well that parks an AirPods Pro 3 case (about 61 × 46 × 22 mm) on its USB-C or MagSafe side so the stem LEDs stay visible.Keychron Q2 HE wrist restA 20 mm wrist rest that matches a Keychron Q2 HE (about 360 × 150 mm) with two 8 × 2 mm magnet pockets for the case's front magnets.Adhesive desk cable clip setA set of low-profile clips that stick to the edge of a desk and hold charging cables.