1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Keychron Q6 Max cable comb
This is not a fixed STL. SpeakCAD generates the keychron q6 max cable comb to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a keychron q6 max cable comb is
A comb that parks a Q6 Max USB-C cable plus two USB-A dongles along a 15–32 mm desk edge. Three saddles are 6.5, 8 and 8 mm ID. The body is 70 × 28 × 22 mm with an M5 thumb screw. Print in PETG with 2 mm walls.
A MagSafe comb is the wrong saddle. Tell SpeakCAD desk thickness, preview the comb in the browser at no cost, then download the STL.
Example prompt
Design a Q6 Max cable comb 70×28×22 mm, saddles 6.5/8/8 mm, clamp for 15–32 mm desks, M5 thumb screw, 2 mm PETG.
People also search
keychron q6 max comb stlq6 max cable holder 3d printkeychron q6 cable organizerq6 max desk comb 3d model
Questions people ask about a keychron q6 max cable comb
A comb that parks a Q6 Max USB-C cable plus two USB-A dongles along a 15–32 mm desk edge. Three saddles are 6.5, 8 and 8 mm ID. The body is 70 × 28 × 22 mm with an M5 thumb screw. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Q6 Max cable comb 70×28×22 mm, saddles 6.5/8/8 mm, clamp for 15–32 mm desks, M5 thumb screw, 2 mm PETG.
A MagSafe comb is the wrong saddle. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Apple Watch Series 11 nightstand angle wedgeA 15 degree wedge that sits under an official Series 11 charger puck so the 46 mm watch face is readable from the pillow.Logitech MX Ergo S trackball wedgeA 20 degree wedge under an MX Ergo S (about 138 × 100 × 50 mm) so the thumb ball sits higher than the stock 0–20 click.Adhesive desk cable clip setA set of low-profile clips that stick to the edge of a desk and hold charging cables.Amazon Echo Show 5 adjustable tilt desk standA stand that raises the Amazon Echo Show 5 and tilts it so the screen is visible when standing at a kitchen counter or desk.Aqara Cube T1 Pro desk cradleA 50 mm cradle that parks an Aqara Cube T1 Pro at 15 degrees so it does not roll off a desk, with a 1 mm lip.MacBook Pro 14-inch M4 MagSafe cable holderA desk clip that parks a MagSafe 3 cable at the exact height of a 14-inch MacBook Pro M4 (about 15.5 mm thick) so the connector does not droop and scratch th…