1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
iMac 24 M4 Magic accessory shelf
This is not a fixed STL. SpeakCAD generates the imac 24 m4 magic accessory shelf to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a imac 24 m4 magic accessory shelf is
A 16 mm shelf that sits behind a 24-inch iMac M4 stand and holds a Magic Keyboard, Magic Mouse and Magic Trackpad so the desk in front stays empty. The plate is 280 × 120 × 16 mm with three labelled wells (281 × 117, 58 × 22 and 160 × 115 mm). Print as two PLA halves.
Accessories in front of an iMac ruin the silhouette. Describe which Magic devices you own in SpeakCAD, preview the shelf in the browser at no cost, then download the STL.
Example prompt
Design an iMac 24 M4 accessory shelf 280×120×16 mm with wells 281×117, 58×22 and 160×115 mm, two PLA halves, 1.6 mm walls.
People also search
imac 24 accessory shelf stlimac magic keyboard tray 3d printimac 24 m4 desk organizerimac magic accessory shelf 3d model
Questions people ask about a imac 24 m4 magic accessory shelf
A 16 mm shelf that sits behind a 24-inch iMac M4 stand and holds a Magic Keyboard, Magic Mouse and Magic Trackpad so the desk in front stays empty. The plate is 280 × 120 × 16 mm with three labelled wells (281 × 117, 58 × 22 and 160 × 115 mm). Print as two PLA halves.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an iMac 24 M4 accessory shelf 280×120×16 mm with wells 281×117, 58×22 and 160×115 mm, two PLA halves, 1.6 mm walls.
Accessories in front of an iMac ruin the silhouette. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Sony WF-1000XM5 desk charging wellA well that parks an XM5 charging case (about 65 × 45 × 25 mm) on its USB-C side so the lid faces up.Desk tray for paper clips and binder clipsA shallow sorting tray that separates paper clips, binder clips of two sizes and push pins into distinct wells.iPhone 17 Air MagSafe wallet standA slim nightstand stand that an iPhone 17 Air (about 147 × 72 × 5.6 mm) snaps onto at 60 degrees for StandBy, with a 4 mm pocket behind the MagSafe disc for…Suunto Vertical charger-cable standA stand that holds a Suunto Vertical on its pogo cable at 25 degrees, 50 mm nest.Mac Studio M4 under-desk trayA ventilated tray that clamps a Mac Studio M4 (about 197 × 197 × 95 mm) under a 15–36 mm desk so the 120 mm rear exhaust stays open.MacBook Air 15 M4 MagSafe right-side clipA clip that hangs from the right edge of a 15-inch MacBook Air M4 and holds the MagSafe 3 cable at chassis height so the tip does not scratch the aluminium.