1
Desk & office
Samsung Galaxy Z Flip 6 desk stand for Flex mode
A desk dock for the Samsung Galaxy Z Flip 6 that cradles the lower half so the phone sits in Flex mode with the top screen angled toward you for video calls and timelapses. The channel is 73.5 mm wide and 8.5 mm thick to take the open phone (165.1 x 71.9 x 6.9 mm) with 0.8 mm clearance, tilted 10 degrees, with a 14 x 9 mm notch so the USB-C plug reaches the port. The 90 x 70 mm base has a cable channel, walls are 3 mm and it prints upright. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| base width (X) | 90 mm |
| base depth (Y) | 70 mm |
| base height (Z) | 15 mm |
| channel wall thickness | 3 mm |
| phone width | 73.5 mm |
| phone thickness (slot gap) | 8.5 mm |
| channel depth (length phone slides into) | 60 mm |
Example prompt
Design a Flex mode desk stand for a Samsung Galaxy Z Flip 6 with a 73.5 mm wide, 8.5 mm thick, 60 mm deep channel tilted 10 degrees, a 14 x 9 mm USB-C notch, a 90 x 70 x 15 mm base with a 5 mm cable channel and 3 mm walls.
Fit notes
Standard phone stands push against the hinge of a foldable and wear it. In SpeakCAD you describe the phone, its case and the angle you like, preview the stand in the browser, refine the channel width in the chat, then download the STL for a dock that supports only the lower half.
Questions people ask about a Samsung Galaxy Z Flip 6 desk stand for Flex mode
A desk dock for the Samsung Galaxy Z Flip 6 that cradles the lower half so the phone sits in Flex mode with the top screen angled toward you for video calls and timelapses. The channel is 73.5 mm wide and 8.5 mm thick to take the open phone (165.1 x 71.9 x 6.9 mm) with 0.8 mm clearance, tilted 10 degrees, with a 14 x 9 mm notch so the USB-C plug reaches the port. The 90 x 70 mm base has a cable channel, walls are 3 mm and it prints upright.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Logitech MX Master 4 charging-puck standReady-made, opens free. A stand that holds a Logitech MX Master 4 (about 126 × 84 × 51 mm) on its USB-C or wireless puck at 10 degrees so the thumb rest stays up.SSL 2 MKII monitor-riser gap fillerReady-made, opens free. A 20 mm filler that lets an SSL 2 MKII sit under a monitor riser with the knobs still reachable, 300 × 40 × 20 mm in two halves.Magic Mouse 2 charging flip standReady-made, opens free. A stand that holds a Magic Mouse 2 / USB-C Magic Mouse on its side so you can charge it without the cable pointing at the ceiling.MacBook Air 15 M4 MagSafe right-side clipReady-made, opens free. A clip that hangs from the right edge of a 15-inch MacBook Air M4 and holds the MagSafe 3 cable at chassis height so the tip does not scratch the aluminium.Mouse bungee with weighted baseReady-made, opens free. A desk accessory that lifts a wired mouse cable off the mat so it never snags or drags.Akai MPK Mini MK3 keyboard stand with laptop shelfReady-made, opens free. A two-tier stand that lifts an Akai MPK Mini MK3 or MPK Mini Plus (318 x 181 x 44 mm) 20 mm off the desk at a 10 degree angle and raises a 13 to 16 inch lapt…