1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Magic Mouse 2 charging flip stand
This is not a fixed STL. SpeakCAD generates the magic mouse 2 charging flip stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a magic mouse 2 charging flip stand is
A stand that holds a Magic Mouse 2 / USB-C Magic Mouse on its side so you can charge it without the cable pointing at the ceiling. The well is 58 × 22 mm at 80 degrees with a 12 mm Lightning or USB-C slot. Print in PLA.
Apple still makes you flip the mouse. Tell SpeakCAD Lightning vs USB-C, preview the stand in the browser without paying, then download the STL.
Example prompt
Model a Magic Mouse charging stand, 58×22 mm well at 80 degrees, 12 mm cable slot, 1.6 mm walls.
People also search
magic mouse charger stand stlmagic mouse 2 charging stand 3d printapple magic mouse dockmagic mouse usb-c stand 3d model
Questions people ask about a magic mouse 2 charging flip stand
A stand that holds a Magic Mouse 2 / USB-C Magic Mouse on its side so you can charge it without the cable pointing at the ceiling. The well is 58 × 22 mm at 80 degrees with a 12 mm Lightning or USB-C slot. Print in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Magic Mouse charging stand, 58×22 mm well at 80 degrees, 12 mm cable slot, 1.6 mm walls.
Apple still makes you flip the mouse. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
iMac 24-inch M4 cable-tidy footA foot that clips onto the iMac 24 M4 stand and gathers power plus Thunderbolt into a 16 mm channel so they do not show from the front.Mac Studio M4 Thunderbolt cable combA comb that sits on the rear I/O of a Mac Studio M4 and separates four Thunderbolt 5 cables plus HDMI so they unplug one at a time.Keychron Lemokey P1 palm restA 18 mm palm rest for a Lemokey P1 (about 370 × 140 mm) with a 8 mm front radius and four 3 mm foot recesses.Sliding webcam privacy cover for laptopA thin adhesive frame with a sliding shutter that covers a laptop camera when you are not on a call.Focusrite Scarlett 2i2 4th Gen angled desk standA desk stand that tilts a Focusrite Scarlett 2i2 4th Gen or Scarlett Solo (the 2i2 is 180 x 47.5 x 117 mm) back 25 degrees so the gain halos and Air button f…Garmin Instinct 3 charger-clip dockA dock that holds an Instinct 3 on its clip charger at 20 degrees, 48 mm nest.