Desk & office

Mouse tray for a 4080 profile sim rig

A mouse tray that bolts on top of a 40 × 80 mm aluminium profile arm of a sim rig, for the mouse you need between races. The 200 × 180 mm platform has a 3 mm rim on three sides so the mouse stays put when the rig shakes, and two countersunk holes 40 mm apart take M8 bolts into the two 8 mm slots of the arm. It is a flat 6 mm plate that prints on its underside without supports and fits a 220 mm bed. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.
No ready-made model yet: building it uses credits (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime).Updated

No ready-made model for this part yet

Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.
1

Describe

Sign in: the example prompt below is filled in. SpeakCAD builds the part from it with AI, 4 credits for the part on a plan, its first 3 small changes free (Maker: 50 credits a month for $7.99, cancel anytime). Replace any number with what you measured first.
2

Adjust

Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).
3

Print

Download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price.

Example prompt

Design a mouse tray that bolts on top of a 40 × 80 mm aluminium profile arm (8 mm slots 40 mm apart). Platform 200 × 180 mm and 6 mm thick with 10 mm corner radii and a flat underside. On top, a rim 3 mm tall and 2 mm thick along the two 180 mm sides and the rear 200 mm side; the front stays open. Two 8.4 mm holes countersunk from the top to 16.5 mm for M8 countersunk bolts, 40 mm apart across the width, centred, 50 mm from the rear edge. Print flat on the underside, no supports.

Build it with AI opens the app with this prompt already typed. Replace any number with what you measured before sending it; the rest of the design stays consistent.

Fit notes

Trays shared online are cut for one arm and one mouse pad. Yours may be a 40 × 40 arm with a single slot, a smaller pad, or an arm that comes in from the side, which moves the bolts. Give SpeakCAD the pad size, the profile and where the arm sits under the tray.

Also searched as: sim rig mouse tray stl, 4080 profile mouse pad mount 3d print, sim racing mouse tray, aluminium profile mouse platform.

Questions people ask about a mouse tray for a 4080 profile sim rig

A mouse tray that bolts on top of a 40 × 80 mm aluminium profile arm of a sim rig, for the mouse you need between races. The 200 × 180 mm platform has a 3 mm rim on three sides so the mouse stays put when the rig shakes, and two countersunk holes 40 mm apart take M8 bolts into the two 8 mm slots of the arm. It is a flat 6 mm plate that prints on its underside without supports and fits a 220 mm bed.

There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.

SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.

A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.

Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.

No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.

Build, adjust and print your mouse tray for a 4080 profile sim rig

Nothing to install. The prompt is waiting in the app after you sign in: SpeakCAD builds the part with AI (credits), no CAD skills needed, you check the fit, then download the STL, 3MF or sliced G-code.

Looking for a finished design by a maker? Browse the desk & office on the marketplace, where makers share their models, most of them free.