1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Sonos Move 2 charging-cradle riser
This is not a fixed STL. SpeakCAD generates the sonos move 2 charging-cradle riser to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a sonos move 2 charging-cradle riser is
A 20 mm riser under a Move 2 cradle so the speaker clears a deep windowsill lip. The plate matches the cradle's 120 × 80 mm feet. Print in PETG.
The cradle rocks on a sill. Tell SpeakCAD the lip, preview the riser in the browser without paying, then download the STL.
Example prompt
Design a Move 2 cradle riser 120×80×20 mm matching the stock feet, 2 mm PETG.
People also search
sonos move 2 riser stlmove 2 cradle lift 3d printsonos move 2 windowsill risermove 2 charger stand 3d model
Questions people ask about a sonos move 2 charging-cradle riser
A 20 mm riser under a Move 2 cradle so the speaker clears a deep windowsill lip. The plate matches the cradle's 120 × 80 mm feet. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Move 2 cradle riser 120×80×20 mm matching the stock feet, 2 mm PETG.
The cradle rocks on a sill. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Amazon Echo Show 5 adjustable tilt desk standA stand that raises the Amazon Echo Show 5 and tilts it so the screen is visible when standing at a kitchen counter or desk.Aqara Cube T1 Pro desk cradleA 50 mm cradle that parks an Aqara Cube T1 Pro at 15 degrees so it does not roll off a desk, with a 1 mm lip.MacBook Pro 16-inch M4 Pro vertical standA vertical stand for a 16-inch MacBook Pro M4 Pro (about 16.8 mm closed, 356 mm wide) with a 18 × 358 mm slot, a 24 mm MagSafe cutout and a 160 × 110 mm base.Studio Display VESA cable channelA channel that hides power and Thunderbolt behind a Studio Display on the official VESA mount so the cables follow the arm instead of hanging.Logitech Brio 100 monitor-riser clipA clip that parks a Brio 100 (about 70 × 30 × 30 mm) on a 4–32 mm monitor riser so the camera sits above a laptop lid.Sticky note caddy with pen grooveA compact holder that keeps a 76 mm square pad of sticky notes flat and a pen in a groove alongside.