Samsung Galaxy Watch charger puck holder for desk
An upright holder for the round Samsung Galaxy Watch wireless charging puck, so a Galaxy Watch 6 or 7 sits on its side charging instead of lying face down on the desk. The puck on recent models is about 40 mm across and 7 mm thick, so the pocket is 40.5 mm with a 1.5 mm lip and a 3.5 mm cable slot at the bottom, tilted 75 degrees so the screen faces you. The 55 x 55 mm base has a rear cable channel, walls are 2.5 mm and the part prints upright.
Samsung has changed the puck size and cable more than once, which is why downloaded holders often do not grip yours. In SpeakCAD you measure your puck once and describe it, preview the holder free in the browser, change the angle or add a second pocket for Galaxy Buds in the chat, then download the STL.
Design a Galaxy Watch charger holder with a 40.5 mm diameter, 7 mm deep puck pocket tilted 75 degrees, a 1.5 mm retaining lip, a 3.5 mm cable slot at the bottom of the pocket, a 55 x 55 x 10 mm base with a rear cable channel and 2.5 mm walls.