1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
MacBook Pro 14-inch M4 MagSafe cable holder
This is not a fixed STL. SpeakCAD generates the macbook pro 14-inch m4 magsafe cable holder to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a macbook pro 14-inch m4 magsafe cable holder is
A desk clip that parks a MagSafe 3 cable at the exact height of a 14-inch MacBook Pro M4 (about 15.5 mm thick) so the connector does not droop and scratch the aluminium. The clip grabs a 15–30 mm desk edge with an M5 thumb screw; the saddle is 13 mm ID. Print in PETG.
A cable falling off the desk is how MagSafe tips get bent. In SpeakCAD you set desk thickness, preview the clip in the browser for free, then download the STL.
Example prompt
Create a MagSafe 3 desk clip for a 14-inch MacBook Pro: 13 mm saddle, clamp for 15–30 mm desks, M5 thumb screw, 2 mm PETG walls.
People also search
macbook pro 14 magsafe holder stlmagsafe 3 cable clip 3d printmacbook pro 14 cable organizermagsafe desk holder 3d model
Questions people ask about a macbook pro 14-inch m4 magsafe cable holder
A desk clip that parks a MagSafe 3 cable at the exact height of a 14-inch MacBook Pro M4 (about 15.5 mm thick) so the connector does not droop and scratch the aluminium. The clip grabs a 15–30 mm desk edge with an M5 thumb screw; the saddle is 13 mm ID. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a MagSafe 3 desk clip for a 14-inch MacBook Pro: 13 mm saddle, clamp for 15–30 mm desks, M5 thumb screw, 2 mm PETG walls.
A cable falling off the desk is how MagSafe tips get bent. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Galaxy S25 Ultra S Pen desk dockA nightstand dock for a Samsung Galaxy S25 Ultra (about 163 × 79 × 8.2 mm) that holds the phone at 50 degrees and parks the S Pen in a 7.2 mm square well 45…Polar Vantage V3 charger cradleA cradle that holds a Vantage V3 on its four-pogo cable at 15 degrees, 48 mm nest.Magic Keyboard with Touch ID desk trayA shallow tray that parks an Apple Magic Keyboard with Touch ID (about 279 × 115 × 11 mm) at 6 degrees with a 14 mm USB-C slot at the back.Mac Studio M4 Thunderbolt cable combA comb that sits on the rear I/O of a Mac Studio M4 and separates four Thunderbolt 5 cables plus HDMI so they unplug one at a time.Keychron Lemokey P1 palm restA 18 mm palm rest for a Lemokey P1 (about 370 × 140 mm) with a 8 mm front radius and four 3 mm foot recesses.Sliding webcam privacy cover for laptopA thin adhesive frame with a sliding shutter that covers a laptop camera when you are not on a call.