1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Magic Keyboard with Touch ID desk tray
This is not a fixed STL. SpeakCAD generates the magic keyboard with touch id desk tray to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a magic keyboard with touch id desk tray is
A shallow tray that parks an Apple Magic Keyboard with Touch ID (about 279 × 115 × 11 mm) at 6 degrees with a 14 mm USB-C slot at the back. The well is 281 × 117 mm with 0.4 mm clearance. Print in PLA.
The keyboard sliding into the monitor base is a daily nudge. Describe a numeric-keypad version if you have one, preview the tray in SpeakCAD for free, then download the STL.
Example prompt
Create a Magic Keyboard Touch ID tray 290×130×18 mm, 281×117 mm well at 6 degrees, 14 mm USB-C slot, 1.6 mm walls.
People also search
magic keyboard stand stlmagic keyboard touch id tray 3d printapple magic keyboard holdermagic keyboard dock 3d model
Questions people ask about a magic keyboard with touch id desk tray
A shallow tray that parks an Apple Magic Keyboard with Touch ID (about 279 × 115 × 11 mm) at 6 degrees with a 14 mm USB-C slot at the back. The well is 281 × 117 mm with 0.4 mm clearance. Print in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Magic Keyboard Touch ID tray 290×130×18 mm, 281×117 mm well at 6 degrees, 14 mm USB-C slot, 1.6 mm walls.
The keyboard sliding into the monitor base is a daily nudge. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Logitech Pebble 2 combo trayA tray that parks a Pebble 2 mouse (about 107 × 59 × 27 mm) and Pebble 2 keyboard so a travel pair stays together.Angled business card holder for deskA tilted display block that fans a stack of up to 30 business cards forward so visitors can take one cleanly.Anker 7-in-1 USB-C hub under-desk clip holderA holder that screws under the desk edge and grips an Anker 7-in-1 USB-C hub so its ports face forward within reach.COROS Pace 3 charger clip dockA bedside dock that holds a COROS Pace 3 (about 42 mm) on its pogo-clip charger at 20 degrees.MacBook Air 13-inch M4 vertical dockA vertical dock that holds a 13-inch MacBook Air M4 (about 11.3 mm closed, 304 mm wide) on its side so MagSafe and the two Thunderbolt ports stay clear.MacBook Pro 14 M4 vertical clamshell dockA vertical clamshell dock for a 14-inch MacBook Pro M4 (about 15.5 mm closed, 312 mm wide) with an 17 × 314 mm slot, a 22 mm MagSafe cutout on the right, and…