1
Desk & office
Sticky note caddy with pen groove
A compact holder that keeps a 76 mm square pad of sticky notes flat and a pen in a groove alongside. The pad well is 78 mm square with a 0.5 mm clearance, 15 mm deep and open on one edge so the last sheets can be peeled easily; the pen groove is 12 mm wide with a rounded floor. A 2 mm wall, 3 mm base and 2 mm fillets keep it neat and it prints as a single flat piece. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| well interior width (X) | 78 mm |
| well interior depth (Y) | 78 mm |
| well interior height (Z) | 15 mm |
| wall thickness | 2 mm |
| base thickness | 3 mm |
| fillet radius on top inner edges | 2 mm |
| pen groove width | 12 mm |
| depth of pen groove (into the top, rounded floor) | 10 mm |
| extra material outside well wall to hold groove | 2 mm |
Example prompt
Model a sticky note caddy with a 78 x 78 mm well 15 mm deep open on the front edge, a 12 mm wide pen groove with a rounded floor along the right side, 2 mm walls, 3 mm base, 2 mm fillets.
Fit notes
Pads come in several sizes, so a caddy generated to your desk deserves better than a one-size download. Tell SpeakCAD your pad dimensions and how many pens you keep, preview the caddy in the browser, add a slot for a phone or a flag-tab dispenser in one message, and then download.
Questions people ask about a sticky note caddy with pen groove
A compact holder that keeps a 76 mm square pad of sticky notes flat and a pen in a groove alongside. The pad well is 78 mm square with a 0.5 mm clearance, 15 mm deep and open on one edge so the last sheets can be peeled easily; the pen groove is 12 mm wide with a rounded floor. A 2 mm wall, 3 mm base and 2 mm fillets keep it neat and it prints as a single flat piece.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Akai MPK Mini MK3 keyboard stand with laptop shelfReady-made, opens free. A two-tier stand that lifts an Akai MPK Mini MK3 or MPK Mini Plus (318 x 181 x 44 mm) 20 mm off the desk at a 10 degree angle and raises a 13 to 16 inch lapt…Elgato Stream Deck Neo monitor-lip mountReady-made, opens free. A lip mount that hangs an Elgato Stream Deck Neo (about 140 × 85 × 20 mm) under a 4–32 mm monitor bezel.Universal Audio Volt 1 desk standReady-made, opens free. A 15 degree stand for a Volt 1 with a 14 mm USB slot.Magic Keyboard Folio iPad 11 riserReady-made, opens free. A 30 mm riser that lifts an 11-inch iPad in its Magic Keyboard Folio so a USB-C hub fits underneath.AirPods Pro 3 desk charging wellReady-made, opens free. A well that parks an AirPods Pro 3 case (about 61 × 46 × 22 mm) on its USB-C or MagSafe side so the stem LEDs stay visible.Mouse bungee with weighted baseReady-made, opens free. A desk accessory that lifts a wired mouse cable off the mat so it never snags or drags.