1
Desk & office
Elgato Stream Deck Neo monitor-lip mount
A lip mount that hangs an Elgato Stream Deck Neo (about 140 × 85 × 20 mm) under a 4–32 mm monitor bezel. The Neo sits in a 142 × 22 mm tray at 30 degrees, two 4.5 mm holes match the Neo's underside inserts, and a 20 mm deep clamp with an M5 thumb screw grabs the bezel. Print in PETG with 2 mm walls. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| tray length (device long side) | 142 mm |
| tray width | 22 mm |
| PETG wall thickness | 2 mm |
| floor thickness | 2 mm |
| side lip height to retain device | 4 mm |
| mounting hole diameter | 4.5 mm |
| distance from tray ends to hole centers | 15 mm |
| how far clamp jaws reach over bezel | 40 mm |
| wall thickness of clamp | 2 mm |
| width of clamp body (along tray width direction roughly) | 30 mm |
| M5 clearance hole | 5.2 mm |
| M5 nut width across flats (+clearance) | 8.2 mm |
| M5 nut thickness | 4.5 mm |
Example prompt
Create a Stream Deck Neo monitor mount: 142×22 mm tray at 30 degrees, two 4.5 mm holes, clamp for 4–32 mm bezels with M5 thumb screw, 2 mm PETG walls.
Fit notes
MK.2 mounts are too wide for the Neo's smaller body. In SpeakCAD you measure the bezel, preview the mount in the browser, then download the STL.
Questions people ask about an Elgato Stream Deck Neo monitor-lip mount
A lip mount that hangs an Elgato Stream Deck Neo (about 140 × 85 × 20 mm) under a 4–32 mm monitor bezel. The Neo sits in a 142 × 22 mm tray at 30 degrees, two 4.5 mm holes match the Neo's underside inserts, and a 20 mm deep clamp with an M5 thumb screw grabs the bezel. Print in PETG with 2 mm walls.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Magic Keyboard with Touch ID desk trayReady-made, opens free. A shallow tray that parks an Apple Magic Keyboard with Touch ID (about 279 × 115 × 11 mm) at 6 degrees with a 14 mm USB-C slot at the back.Apple Watch Series 11 nightstand angle wedgeReady-made, opens free. A 15 degree wedge that sits under an official Series 11 charger puck so the 46 mm watch face is readable from the pillow.Desk tray for paper clips and binder clipsReady-made, opens free. A shallow sorting tray that separates paper clips, binder clips of two sizes and push pins into distinct wells.Anker 7-in-1 USB-C hub under-desk clip holderReady-made, opens free. A holder that screws under the desk edge and grips an Anker 7-in-1 USB-C hub so its ports face forward within reach.Framework Laptop 13 vertical dockReady-made, opens free. A vertical dock that holds a Framework Laptop 13 (about 16 mm thick closed, 297 mm wide) on its side so the expansion cards stay accessible.Shure SM7dB yoke spacerReady-made, opens free. A pair of spacers that move an SM7dB yoke 8 mm so a thicker windscreen still clears.