1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
AirPods Pro 3 desk charging well
This is not a fixed STL. SpeakCAD generates the airpods pro 3 desk charging well to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a airpods pro 3 desk charging well is
A well that parks an AirPods Pro 3 case (about 61 × 46 × 22 mm) on its USB-C or MagSafe side so the stem LEDs stay visible. The nest is 63 × 48 × 12 mm with 0.4 mm clearance, a 12 mm cable slot at the back, and a 80 × 60 mm base. Print flat in PLA with 1.6 mm walls.
AirPods 4 stands are too shallow for the Pro 3 hinge. Tell SpeakCAD MagSafe vs USB-C, preview the well in the browser for free, then download the STL.
Example prompt
Create an AirPods Pro 3 charging well 80×60×16 mm, 63×48×12 mm nest, 12 mm rear cable slot, 1.6 mm walls.
People also search
airpods pro 3 stand stlairpods pro 3 charging well 3d printairpods pro 3 desk dockairpods pro 3 holder 3d model
Questions people ask about a airpods pro 3 desk charging well
A well that parks an AirPods Pro 3 case (about 61 × 46 × 22 mm) on its USB-C or MagSafe side so the stem LEDs stay visible. The nest is 63 × 48 × 12 mm with 0.4 mm clearance, a 12 mm cable slot at the back, and a 80 × 60 mm base. Print flat in PLA with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create an AirPods Pro 3 charging well 80×60×16 mm, 63×48×12 mm nest, 12 mm rear cable slot, 1.6 mm walls.
AirPods 4 stands are too shallow for the Pro 3 hinge. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
IKEA LACK 60 mm square cable grommetA square grommet that drops into a 60 mm LACK hole and presents a 20 mm brush opening plus a 8 mm USB-C notch.MacBook Air 15-inch M4 clamshell standA clamshell stand for a 15-inch MacBook Air M4 (about 11.5 mm closed, 340 mm wide) that lifts the hinge 20 mm so air can exit and a USB-C hub can sit underne…MacBook Pro 14 M4 vertical clamshell dockA vertical clamshell dock for a 14-inch MacBook Pro M4 (about 15.5 mm closed, 312 mm wide) with an 17 × 314 mm slot, a 22 mm MagSafe cutout on the right, and…Logitech MX Mechanical palm restA 18 mm palm rest that matches an MX Mechanical (about 430 × 150 mm) with a 8 mm front radius and four 3 mm rubber-foot recesses.Pen cup with sloped compartmentsA desk pen holder divided into three angled compartments so pens, markers and scissors each lean forward and stay easy to grab.Elgato Wave 3 microphone desk riser with cable slotA riser that lifts the Elgato Wave:3 closer to mouth height without a boom arm.