1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
iPad Air 13-inch M3 Magic Keyboard riser
This is not a fixed STL. SpeakCAD generates the ipad air 13-inch m3 magic keyboard riser to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ipad air 13-inch m3 magic keyboard riser is
A 28 mm riser that lifts a 13-inch iPad Air M3 in its Magic Keyboard so a USB-C hub fits underneath. Four 10 mm posts match the keyboard feet on a 280 × 190 mm span, and a 80 × 18 mm rear cable gap stays open. Print as two PLA halves with 2 mm walls.
The 11-inch folio riser is too narrow for the 13-inch Air keyboard. Describe the foot spacing in SpeakCAD, preview the riser in the browser without paying, then download the STL.
Example prompt
Model an iPad Air 13 M3 Magic Keyboard riser 28 mm tall, four 10 mm foot posts on a 280×190 mm span, 80×18 mm rear gap, two PLA halves, 2 mm walls.
People also search
ipad air 13 riser stlipad air 13 magic keyboard stand 3d printipad air m3 hub riser13 inch ipad air keyboard riser 3d model
Questions people ask about a ipad air 13-inch m3 magic keyboard riser
A 28 mm riser that lifts a 13-inch iPad Air M3 in its Magic Keyboard so a USB-C hub fits underneath. Four 10 mm posts match the keyboard feet on a 280 × 190 mm span, and a 80 × 18 mm rear cable gap stays open. Print as two PLA halves with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an iPad Air 13 M3 Magic Keyboard riser 28 mm tall, four 10 mm foot posts on a 280×190 mm span, 80×18 mm rear gap, two PLA halves, 2 mm walls.
The 11-inch folio riser is too narrow for the 13-inch Air keyboard. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
MacBook Pro 14 M4 SD-reader under-stand shelfA 20 mm shelf that sits under a 14-inch MacBook Pro stand and holds an SD card reader plus two CFexpress cards in labelled wells.iMac 24 M4 Magic accessory shelfA 16 mm shelf that sits behind a 24-inch iMac M4 stand and holds a Magic Keyboard, Magic Mouse and Magic Trackpad so the desk in front stays empty.Logitech MX Ergo S trackball wedgeA 20 degree wedge under an MX Ergo S (about 138 × 100 × 50 mm) so the thumb ball sits higher than the stock 0–20 click.Two-piece tablet stand with adjustable angleA cradle and a folding prop that together hold a tablet at 30, 45 or 60 degrees.Anker 737 power bank desk cradle with cable channelA cradle that keeps the Anker 737 Power Bank (PowerCore 24K) standing upright on a desk with its charge cable plugged in and its display readable.IKEA LACK 60 mm square cable grommetA square grommet that drops into a 60 mm LACK hole and presents a 20 mm brush opening plus a 8 mm USB-C notch.