1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
MacBook Pro 14 M4 HDMI hub under-stand
This is not a fixed STL. SpeakCAD generates the macbook pro 14 m4 hdmi hub under-stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a macbook pro 14 m4 hdmi hub under-stand is
A 22 mm shelf that sits under a 14-inch MacBook Pro M4 (about 15.5 mm closed, 312 mm wide) and parks a 6-port HDMI/SD hub so the left Thunderbolt ports stay unloaded. The plate is 240 × 90 × 22 mm with a 95 × 28 mm hub well, a 20 mm HDMI clearance slot at the back, and four 12 mm posts that register the Pro's rubber feet. Print as two PLA halves so each fits a 220 mm bed, 2 mm walls.
A hub hanging from the left side is a lever on the port. In SpeakCAD you type the hub you measured, preview the shelf in the browser at no cost, then download the STL.
Example prompt
Design a MacBook Pro 14 M4 HDMI hub under-stand 240×90×22 mm with a 95×28 mm hub well, 20 mm HDMI rear slot, four 12 mm foot posts, two PLA halves, 2 mm walls.
People also search
macbook pro 14 hub stand stlmacbook pro 14 hdmi under stand 3d printm4 pro dongle traymacbook pro 14 hub shelf 3d model
Questions people ask about a macbook pro 14 m4 hdmi hub under-stand
A 22 mm shelf that sits under a 14-inch MacBook Pro M4 (about 15.5 mm closed, 312 mm wide) and parks a 6-port HDMI/SD hub so the left Thunderbolt ports stay unloaded. The plate is 240 × 90 × 22 mm with a 95 × 28 mm hub well, a 20 mm HDMI clearance slot at the back, and four 12 mm posts that register the Pro's rubber feet. Print as two PLA halves so each fits a 220 mm bed, 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a MacBook Pro 14 M4 HDMI hub under-stand 240×90×22 mm with a 95×28 mm hub well, 20 mm HDMI rear slot, four 12 mm foot posts, two PLA halves, 2 mm walls.
A hub hanging from the left side is a lever on the port. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Sonos Move 2 charging-cradle riserA 20 mm riser under a Move 2 cradle so the speaker clears a deep windowsill lip.MacBook Pro 14 M4 SD-reader under-stand shelfA 20 mm shelf that sits under a 14-inch MacBook Pro stand and holds an SD card reader plus two CFexpress cards in labelled wells.Apple Watch Series 11 nightstand angle wedgeA 15 degree wedge that sits under an official Series 11 charger puck so the 46 mm watch face is readable from the pillow.Logitech MX Ergo S trackball wedgeA 20 degree wedge under an MX Ergo S (about 138 × 100 × 50 mm) so the thumb ball sits higher than the stock 0–20 click.Two-piece tablet stand with adjustable angleA cradle and a folding prop that together hold a tablet at 30, 45 or 60 degrees.Anker 737 power bank desk cradle with cable channelA cradle that keeps the Anker 737 Power Bank (PowerCore 24K) standing upright on a desk with its charge cable plugged in and its display readable.