1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Arturia MiniLab 3 angled feet
This is not a fixed STL. SpeakCAD generates the arturia minilab 3 angled feet to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a arturia minilab 3 angled feet is
Replacement rear feet that put a MiniLab 3 at 8 degrees, 20 × 12 × 10 mm with the stock 4 mm pin. Print a pair in PETG.
Stock feet are flat. Tell SpeakCAD the pin, preview the feet in the browser at no cost, then download the STL.
Example prompt
Design MiniLab 3 angled feet 20×12×10 mm, 8 degrees, 4 mm pin, PETG pair.
People also search
minilab 3 feet stlarturia minilab 3 stand 3d printminilab 3 angled feetarturia mini feet 3d model
Questions people ask about a arturia minilab 3 angled feet
Replacement rear feet that put a MiniLab 3 at 8 degrees, 20 × 12 × 10 mm with the stock 4 mm pin. Print a pair in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design MiniLab 3 angled feet 20×12×10 mm, 8 degrees, 4 mm pin, PETG pair.
Stock feet are flat. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Anker MagGo Qi2 charger puck desk standAn angled desk stand for the round Anker MagGo Qi2 wireless charging pad, so a Qi2 phone such as an iPhone 16 or Galaxy S25 stands at 60 degrees for video ca…Garmin Forerunner 970 bedside charger standA small bedside stand for a Garmin Forerunner 970 (about 47 mm) that holds the watch on its clip charger at 25 degrees so the display is readable from the pi…Teenage Engineering OP-1 Field standA low stand that holds an OP-1 Field at 12 degrees with a 14 mm USB-C slot and 3 mm side lips so it does not slide.Apple Pencil Pro MagSafe pair trayA tray that parks an Apple Pencil Pro and a USB-C Pencil side by side with 9 mm saddles and a 12 mm cap well.Dyson OnTrac charging-case standA stand that parks a Dyson OnTrac charging case (about 80 × 70 × 40 mm) at 20 degrees so the earbuds face up on a nightstand.Samsung Galaxy S25 Ultra desk standA stand that holds a Galaxy S25 Ultra (about 163 × 79 × 8.2 mm) at 55 degrees with a 14 mm USB-C slot and a 7.2 mm S Pen well.