1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Keychron Q1 HE magnetic wrist rest
This is not a fixed STL. SpeakCAD generates the keychron q1 he magnetic wrist rest to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a keychron q1 he magnetic wrist rest is
A 20 mm tall wrist rest that matches a Keychron Q1 HE (about 380 × 150 mm) with two 8 × 2 mm magnet pockets that line up with the case's front magnets. The rest is 380 × 80 × 20 mm with a 8 mm front radius and a 3 mm rubber-foot recess at each corner. Print in two 190 mm halves in PLA so it fits a 220 mm bed.
A Q1 rest is 8 mm too short for the HE's extra front rail. In SpeakCAD you confirm the board width, preview the rest in the browser at no cost, then download the STL.
Example prompt
Design a Keychron Q1 HE wrist rest 380×80×20 mm in two halves, 8 mm front radius, two 8×2 mm magnet pockets, four 3 mm foot recesses and 2 mm walls.
People also search
keychron q1 he wrist rest stlq1 he magnetic wrist rest 3d printkeychron q1 he palm restq1 he keyboard rest 3d model
Questions people ask about a keychron q1 he magnetic wrist rest
A 20 mm tall wrist rest that matches a Keychron Q1 HE (about 380 × 150 mm) with two 8 × 2 mm magnet pockets that line up with the case's front magnets. The rest is 380 × 80 × 20 mm with a 8 mm front radius and a 3 mm rubber-foot recess at each corner. Print in two 190 mm halves in PLA so it fits a 220 mm bed.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Keychron Q1 HE wrist rest 380×80×20 mm in two halves, 8 mm front radius, two 8×2 mm magnet pockets, four 3 mm foot recesses and 2 mm walls.
A Q1 rest is 8 mm too short for the HE's extra front rail. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
MacBook Air M4 USB-C hub under-clamshell trayA 18 mm tray that sits under a closed MacBook Air M4 and holds an Anker or Anker-style 6-port hub so HDMI and SD do not hang off the left side.IKEA HEMNES nightstand 35 mm cable grommetA 35 mm grommet that drops into a drilled HEMNES nightstand top so a lamp and phone cable pass without a raw hole.Samsung Galaxy Buds 3 Pro desk wellA well that parks a Buds 3 Pro case (about 65 × 50 × 25 mm) at 15 degrees with a 12 mm USB-C slot.Quad Lock desk dock stand with USB-C cable slotA desk stand with a Quad Lock style twist-lock recess on a 60 degree face, so a phone in a Quad Lock case clicks on in portrait or landscape and charges thro…Garmin Fenix 8 charger cable dockA desk dock that holds a Garmin Fenix 8 (51 mm case) face-out while the official clip charger clamps the back.Arturia MiniLab 3 angled feetReplacement rear feet that put a MiniLab 3 at 8 degrees, 20 × 12 × 10 mm with the stock 4 mm pin.