1
Desk & office
Rode Wireless PRO transmitter desk stand
This is not a fixed STL. SpeakCAD generates the rode wireless pro transmitter desk stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a desk stand for a Rode Wireless PRO transmitter, 3 mm clip tongue at 20°, 60×50 mm weighted base, USB-C cable slot.
What a rode wireless pro transmitter desk stand is
A small angled stand that turns a Rode Wireless PRO transmitter (about 44 × 45 × 20 mm) into a desk microphone for calls and podcasts. The transmitter clips onto a 3 mm tongue at 20° back from vertical, a 60 × 50 mm weighted base keeps it steady, and a cable slot reaches the USB-C port. Print on its side in PETG.
The Wireless GO II clip is slightly thinner and wobbles on the tongue; ask the chat to thicken it. Open the ready-made model in SpeakCAD for free, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
rode wireless pro stand stlwireless pro transmitter desk stand 3d printrode wireless pro holderlav mic desk stand
Questions people ask about a rode wireless pro transmitter desk stand
A small angled stand that turns a Rode Wireless PRO transmitter (about 44 × 45 × 20 mm) into a desk microphone for calls and podcasts. The transmitter clips onto a 3 mm tongue at 20° back from vertical, a 60 × 50 mm weighted base keeps it steady, and a cable slot reaches the USB-C port. Print on its side in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a desk stand for a Rode Wireless PRO transmitter, 3 mm clip tongue at 20°, 60×50 mm weighted base, USB-C cable slot.
The Wireless GO II clip is slightly thinner and wobbles on the tongue; ask the chat to thicken it. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
iPad Air 11 inch drawing stand with Apple Pencil trayA low-angle drawing stand for the iPad Air 11 (247.6 x 178.5 x 6.1 mm) that props the tablet at 20 degrees like a drafting board, with a groove along the fro…iPad mini 7 bedside reading standA bedside stand that holds an iPad mini 7 (about 195 × 135 × 6.3 mm) at 40 degrees in portrait with a 14 mm USB-C slot and a 8 mm lip so a Folio case does no…Keychron Q8 Max split palm restA split palm rest for a Q8 Max Alice with two 8 × 2 mm magnet pockets matching the case.iPad Pro 11-inch M4 Pencil charging standA stand that holds an 11-inch iPad Pro M4 (about 250 × 177 × 5.3 mm) at 60 degrees for StandBy and parks an Apple Pencil Pro on a 9 mm MagSafe saddle.Logitech MX Keys S angled trayA 6 degree tray that parks an MX Keys S (about 440 × 130 × 20 mm) so the front edge matches an MX Master.Elgato Stream Deck MK.2 45 degree standA steeper desk stand for the Elgato Stream Deck MK.2 (about 118 × 84 × 21 mm without its magnetic stand) that sets it at 45 degrees with a 120 mm cradle, a 6…