1
Desk & office
Galaxy Tab S10 Ultra easel stand
An easel that holds a Galaxy Tab S10 Ultra (about 326 × 208 × 5.4 mm) at 20 or 50 degrees for drawing, with a 210 mm ledge 10 mm deep and a folding 6 mm pin stay. The back rest is 200 mm tall with a 14 mm USB-C cutout, and rubber-foot recesses 10 mm across sit under the ledge. Print the ledge and stay as two PETG parts. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| PETG wall thickness | 2.4 mm |
| hinge pin diameter | 6 mm |
| clearance for pin holes | 0.3 mm |
| ledge length (x) | 210 mm |
| ledge depth (y) | 10 mm |
| ledge wall height (holds tablet bottom edge) | 16 mm |
| base tray length (x) | 210 mm |
| base tray depth (y) | 90 mm |
| base tray thickness | 4 mm |
| back rest width | 210 mm |
| back rest height | 200 mm |
| rib width | 2.4 mm |
| rib protrusion | 6 mm |
| USB-C cutout width | 14 mm |
Example prompt
Model a Tab S10 Ultra easel with a 210×10 mm ledge, 200 mm back rest, 20 and 50 degree stays on a 6 mm pin, 14 mm USB-C cutout, 10 mm foot recesses and 2.4 mm PETG walls.
Fit notes
S9 Ultra easels are 8 mm too narrow for the S10's corners. In SpeakCAD you enter the case thickness, preview the easel in the browser, then download the STL.
Questions people ask about a Galaxy Tab S10 Ultra easel stand
An easel that holds a Galaxy Tab S10 Ultra (about 326 × 208 × 5.4 mm) at 20 or 50 degrees for drawing, with a 210 mm ledge 10 mm deep and a folding 6 mm pin stay. The back rest is 200 mm tall with a 14 mm USB-C cutout, and rubber-foot recesses 10 mm across sit under the ledge. Print the ledge and stay as two PETG parts.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Slim bookend pair with anti-slip baseReady-made, opens free. A pair of L-shaped bookends that keep manuals and notebooks upright on a desk or open shelf.Anker 737 power bank desk cradle with cable channelReady-made, opens free. A cradle that keeps the Anker 737 Power Bank (PowerCore 24K) standing upright on a desk with its charge cable plugged in and its display readable.ZSA Moonlander tenting legs setReady-made, opens free. A set of four screw-in tenting legs for a ZSA Moonlander that replace the stock 8 mm feet with 15, 25 and 40 mm options.Focusrite Scarlett Solo 4th Gen angled standReady-made, opens free. A 20 degree stand for a Scarlett Solo 4th Gen with a 14 mm USB-C slot and 10 mm foot recesses.Magic Keyboard with Touch ID desk trayReady-made, opens free. A shallow tray that parks an Apple Magic Keyboard with Touch ID (about 279 × 115 × 11 mm) at 6 degrees with a 14 mm USB-C slot at the back.Apple Watch Series 11 nightstand angle wedgeReady-made, opens free. A 15 degree wedge that sits under an official Series 11 charger puck so the 46 mm watch face is readable from the pillow.