1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
IKEA LACK 60 mm square cable grommet
This is not a fixed STL. SpeakCAD generates the ikea lack 60 mm square cable grommet to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea lack 60 mm square cable grommet is
A square grommet that drops into a 60 mm LACK hole and presents a 20 mm brush opening plus a 8 mm USB-C notch. Print in PLA.
A round grommet spins in a square cut. Tell SpeakCAD the hole, preview the grommet in the browser for free, then download the STL.
Example prompt
Create a 60 mm square LACK grommet with a 20 mm brush opening and an 8 mm USB-C notch, 1.6 mm walls.
People also search
ikea lack grommet stllack cable hole cover 3d print60mm lack grommetlack desk cable grommet 3d model
Questions people ask about a ikea lack 60 mm square cable grommet
A square grommet that drops into a 60 mm LACK hole and presents a 20 mm brush opening plus a 8 mm USB-C notch. Print in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a 60 mm square LACK grommet with a 20 mm brush opening and an 8 mm USB-C notch, 1.6 mm walls.
A round grommet spins in a square cut. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
iPad Pro 11-inch M4 Pencil charging standA stand that holds an 11-inch iPad Pro M4 (about 250 × 177 × 5.3 mm) at 60 degrees for StandBy and parks an Apple Pencil Pro on a 9 mm MagSafe saddle.IKEA ALEX monitor-riser 60 mm grommetA 60 mm round grommet for a homemade ALEX monitor riser so cables drop behind the drawers instead of over the front.Angled desk phone stand with cable slotA 60 degree cradle that holds a phone upright for video calls while a charging cable passes up through a slot in the base.Oura Ring charger puck desk dock with ring restA small desk dock that holds the round Oura Ring charger, roughly 50 mm across on Gen3 and Ring 4, and raises it so the ring sits on the post at a comfortabl…Framework Laptop 13 vertical dockA vertical dock that holds a Framework Laptop 13 (about 16 mm thick closed, 297 mm wide) on its side so the expansion cards stay accessible.Keychron Q8 Max split palm restA split palm rest for a Q8 Max Alice with two 8 × 2 mm magnet pockets matching the case.