1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
NuPhy Air75 V3 tenting feet
This is not a fixed STL. SpeakCAD generates the nuphy air75 v3 tenting feet to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a nuphy air75 v3 tenting feet is
A set of 8 degree tenting feet that replace Air75 V3 stock feet, 20 × 10 × 8 mm with the official pin. Print four in PETG.
Stock feet are 3 degrees. Tell SpeakCAD 6 or 8 degrees, preview the feet in the browser without paying, then download the STL.
Example prompt
Model Air75 V3 tenting feet 20×10×8 mm, 8 degrees, official pin, PETG, print four.
People also search
nuphy air75 v3 feet stlair75 v3 tenting 3d printnuphy air75 tenting feetair75 v3 angled feet 3d model
Questions people ask about a nuphy air75 v3 tenting feet
A set of 8 degree tenting feet that replace Air75 V3 stock feet, 20 × 10 × 8 mm with the official pin. Print four in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model Air75 V3 tenting feet 20×10×8 mm, 8 degrees, official pin, PETG, print four.
Stock feet are 3 degrees. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
IKEA LACK 60 mm square cable grommetA square grommet that drops into a 60 mm LACK hole and presents a 20 mm brush opening plus a 8 mm USB-C notch.MacBook Pro 14-inch M4 MagSafe cable holderA desk clip that parks a MagSafe 3 cable at the exact height of a 14-inch MacBook Pro M4 (about 15.5 mm thick) so the connector does not droop and scratch th…Mac mini M4 rear cable combA comb that clips onto the rear edge of a Mac mini M4 and separates HDMI, two Thunderbolt cables and power so they do not unplug when you slide the mini.Logitech MX Mechanical palm restA 18 mm palm rest that matches an MX Mechanical (about 430 × 150 mm) with a 8 mm front radius and four 3 mm rubber-foot recesses.Pen cup with sloped compartmentsA desk pen holder divided into three angled compartments so pens, markers and scissors each lean forward and stay easy to grab.Elgato Wave 3 microphone desk riser with cable slotA riser that lifts the Elgato Wave:3 closer to mouth height without a boom arm.