1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Elgato Facecam MK.2 privacy shutter
This is not a fixed STL. SpeakCAD generates the elgato facecam mk.2 privacy shutter to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a elgato facecam mk.2 privacy shutter is
A sliding shutter that covers a Facecam MK.2 lens, 30 × 18 × 6 mm with a 1 mm track. Print in PLA.
A sticker on the lens leaves residue. In SpeakCAD you confirm MK.2 vs original, preview the shutter in the browser without paying, then download the STL.
Example prompt
Model a Facecam MK.2 shutter 30×18×6 mm, 1 mm track, 1.2 mm walls.
People also search
facecam mk2 shutter stlelgato facecam privacy 3d printfacecam mk2 coverelgato webcam shutter 3d model
Questions people ask about a elgato facecam mk.2 privacy shutter
A sliding shutter that covers a Facecam MK.2 lens, 30 × 18 × 6 mm with a 1 mm track. Print in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Facecam MK.2 shutter 30×18×6 mm, 1 mm track, 1.2 mm walls.
A sticker on the lens leaves residue. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Keychron Lemokey P1 palm restA 18 mm palm rest for a Lemokey P1 (about 370 × 140 mm) with a 8 mm front radius and four 3 mm foot recesses.Sliding webcam privacy cover for laptopA thin adhesive frame with a sliding shutter that covers a laptop camera when you are not on a call.Focusrite Scarlett 2i2 4th Gen angled desk standA desk stand that tilts a Focusrite Scarlett 2i2 4th Gen or Scarlett Solo (the 2i2 is 180 x 47.5 x 117 mm) back 25 degrees so the gain halos and Air button f…Garmin Instinct 3 charger-clip dockA dock that holds an Instinct 3 on its clip charger at 20 degrees, 48 mm nest.Mac Studio M4 under-desk trayA ventilated tray that clamps a Mac Studio M4 (about 197 × 197 × 95 mm) under a 15–36 mm desk so the 120 mm rear exhaust stays open.AirPods Pro 3 desk charging wellA well that parks an AirPods Pro 3 case (about 61 × 46 × 22 mm) on its USB-C or MagSafe side so the stem LEDs stay visible.