1
Desk & office
Audient EVO 4 mic-stand clamp
A clamp that hangs an EVO 4 on a 15–25 mm mic stand so the interface sits next to the mic. M5 pinch, PETG. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| Target pole diameter to fit now (mm) | 20 mm |
| Ring height | 20 mm |
| Ring wall thickness | 3 mm |
| M5 clearance hole diameter | 5.2 mm |
| Ear width (along Y) | 8 mm |
| Ear length (sticking out radially) | 10 mm |
| Slot opening width | 4 mm |
| Mount plate width | 30 mm |
| Mount plate length (radial) | 22 mm |
| M3 clearance hole diameter | 3.4 mm |
| Hole distance from plate edges | 5 mm |
| Sliding clearance around pole | 0.4 mm |
Example prompt
Design an EVO 4 stand clamp for 15–25 mm poles, M5 pinch, 2 mm PETG.
Fit notes
USB cable stretch is a noise source. Tell SpeakCAD the stand, preview the clamp in the browser, then download the STL.
Questions people ask about an Audient EVO 4 mic-stand clamp
A clamp that hangs an EVO 4 on a 15–25 mm mic stand so the interface sits next to the mic. M5 pinch, PETG.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Adhesive desk cable clip setReady-made, opens free. A set of low-profile clips that stick to the edge of a desk and hold charging cables.Elgato Stream Deck XL low-profile angled standReady-made, opens free. A single-piece stand that replaces the tall stock cradle of the Elgato Stream Deck XL with a slimmer 30 degree wedge.Sony WH-1000XM6 under-desk hangerReady-made, opens free. An under-desk hanger for Sony WH-1000XM6 headphones (about 190 mm headband span) with a 22 mm saddle, a 6 mm clamp that grabs a 15–30 mm desktop, and a 10 mm…Midi Fighter 3D angled standReady-made, opens free. A 20 degree stand for a Midi Fighter 3D with a 14 mm USB slot and 10 mm rubber-foot recesses.MacBook Pro 14 M4 SD-reader under-stand shelfReady-made, opens free. A 20 mm shelf that sits under a 14-inch MacBook Pro stand and holds an SD card reader plus two CFexpress cards in labelled wells.HomePod 2nd gen bookshelf isolation standReady-made, opens free. A 20 mm isolation stand under a full-size HomePod 2nd gen (about 168 mm diameter, 142 mm tall) so the bass does not buzz a bookshelf.