Oura Ring charger puck desk dock with ring rest
A small desk dock that holds the round Oura Ring charger, roughly 50 mm across on Gen3 and Ring 4, and raises it so the ring sits on the post at a comfortable angle and the USB-C cable runs out the back. The charger presses into a 50.5 mm pocket with a 1.5 mm lip, a groove beside it stores the ring when it is not charging, and the 80 x 60 mm base has a 4 mm cable channel underneath so the dock sits flat. Walls are 2.5 mm and it prints upright.
Oura has changed the charger between generations, so a downloaded dock is often a millimetre out and the charger rocks. In SpeakCAD you type the diameter and height of your charger, preview the dock free in the browser, add a second pocket for a partner ring in the chat, then download the STL.
Design an Oura Ring charger dock with a 50.5 mm diameter, 8 mm deep pocket, a 1.5 mm retaining lip, a 25 mm long half-round groove 4 mm wide beside it as a ring rest, an 80 x 60 x 12 mm base with a 4 mm underside cable channel and 2.5 mm walls.