Desk & office

Elgato Stream Deck MK.2 under-monitor mount

A bracket that hangs an Elgato Stream Deck MK.2 below the bottom edge of a monitor so it stays in reach without a footprint on the desk. The MK.2 body is 118 x 84 x 25 mm without its stand, so the mount is a cradle with a 119 x 26 mm pocket, 0.5 mm clearance, a 2 mm front lip and a 40 mm slot behind for the USB-C cable. The cradle tilts 20 degrees forward and joins a 30 mm strap that fixes to a 100 x 100 VESA plate with M4 holes, or optionally to the monitor bezel with 3M strips. Walls are 3 mm and it prints on its back without supports.

A measured mount matches your monitor's stand and bezel height, unlike generic downloads that end up too low. In SpeakCAD you describe the Stream Deck and monitor, preview the mount free in the browser, change the angle or fit a Stream Deck + in the chat, and download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design an under-monitor cradle for an Elgato Stream Deck MK.2 118 x 84 x 25 mm with a 119 x 26 mm pocket and 0.5 mm clearance, 2 mm front lip, 40 mm rear USB-C slot, 20 degree forward tilt, 3 mm walls and a 30 mm strap to a 100 x 100 mm VESA plate with M4 holes.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More desk & office

Adhesive desk cable clip setA set of low-profile clips that stick to the edge of a desk and hold charging cables.Mouse bungee with weighted baseA desk accessory that lifts a wired mouse cable off the mat so it never snags or drags.iPad Air 11 inch drawing stand with Apple Pencil trayA low-angle drawing stand for the iPad Air 11 (247.6 x 178.5 x 6.1 mm) that props the tablet at 20 degrees like a drafting board, with a groove along the fro…Elgato Stream Deck XL low-profile angled standA single-piece stand that replaces the tall stock cradle of the Elgato Stream Deck XL with a slimmer 30 degree wedge.Amazon Echo Show 5 adjustable tilt desk standA stand that raises the Amazon Echo Show 5 and tilts it so the screen is visible when standing at a kitchen counter or desk.Under-desk headphone holder with screw mountA curved hanger that screws to the underside of a desk so headphones hang within reach.

Make your elgato stream deck mk.2 under-monitor mount now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.