1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Keychron Lemokey P1 palm rest
This is not a fixed STL. SpeakCAD generates the keychron lemokey p1 palm rest to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a keychron lemokey p1 palm rest is
A 18 mm palm rest for a Lemokey P1 (about 370 × 140 mm) with a 8 mm front radius and four 3 mm foot recesses. The rest is 370 × 75 × 18 mm. Print as two PLA halves.
A Q1 HE rest is too deep for the P1. In SpeakCAD you confirm P1 vs P1 HE, preview the rest in the browser without paying, then download the STL.
Example prompt
Model a Lemokey P1 palm rest 370×75×18 mm in two halves, 8 mm front radius, four 3 mm foot recesses, 2 mm walls.
People also search
lemokey p1 rest stlkeychron p1 palm rest 3d printlemokey p1 wrist restp1 keyboard rest 3d model
Questions people ask about a keychron lemokey p1 palm rest
A 18 mm palm rest for a Lemokey P1 (about 370 × 140 mm) with a 8 mm front radius and four 3 mm foot recesses. The rest is 370 × 75 × 18 mm. Print as two PLA halves.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Lemokey P1 palm rest 370×75×18 mm in two halves, 8 mm front radius, four 3 mm foot recesses, 2 mm walls.
A Q1 HE rest is too deep for the P1. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
iPhone 16 Pro bedside MagSafe charging stand for StandByA nightstand stand that holds an Apple MagSafe puck at 65 degrees so an iPhone 16 Pro (149.6 x 71.5 x 8.25 mm) charges in landscape and shows the StandBy clock.Nothing Phone (3) Glyph desk standA clear-back-friendly stand for a Nothing Phone (3) (about 160 × 76 × 8.3 mm) that holds the phone at 65 degrees so the Glyph interface stays visible.Midi Fighter 3D angled standA 20 degree stand for a Midi Fighter 3D with a 14 mm USB slot and 10 mm rubber-foot recesses.Magic Keyboard with Touch ID desk trayA shallow tray that parks an Apple Magic Keyboard with Touch ID (about 279 × 115 × 11 mm) at 6 degrees with a 14 mm USB-C slot at the back.Mac Studio M4 Thunderbolt cable combA comb that sits on the rear I/O of a Mac Studio M4 and separates four Thunderbolt 5 cables plus HDMI so they unplug one at a time.Sony WF-1000XM5 desk charging wellA well that parks an XM5 charging case (about 65 × 45 × 25 mm) on its USB-C side so the lid faces up.