1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
iPad Pro 11 M5 Magic Keyboard riser
This is not a fixed STL. SpeakCAD generates the ipad pro 11 m5 magic keyboard riser to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ipad pro 11 m5 magic keyboard riser is
A two-piece riser that lifts an 11-inch iPad Pro M5 in its Magic Keyboard (about 250 × 178 × 16 mm closed) by 40 mm so a USB-C hub can sit underneath. Four 12 mm posts register the keyboard's rubber feet, the span is 252 × 180 mm, and a 80 × 20 mm rear cable gap stays open. Print the left and right halves in PLA so they fit a 220 mm bed.
M4 keyboard risers miss the new foot spacing. In SpeakCAD you measure the feet, preview the riser in the browser for free, then download the STL.
Example prompt
Create an iPad Pro 11 M5 Magic Keyboard riser 252×180×40 mm in two halves, four 12 mm foot posts, 80×20 mm rear cable gap, 2.4 mm walls, each half under 220 mm.
People also search
ipad pro m5 keyboard riser stlipad pro 11 magic keyboard stand 3d printipad m5 desk risermagic keyboard under hub stand 3d model
Questions people ask about a ipad pro 11 m5 magic keyboard riser
A two-piece riser that lifts an 11-inch iPad Pro M5 in its Magic Keyboard (about 250 × 178 × 16 mm closed) by 40 mm so a USB-C hub can sit underneath. Four 12 mm posts register the keyboard's rubber feet, the span is 252 × 180 mm, and a 80 × 20 mm rear cable gap stays open. Print the left and right halves in PLA so they fit a 220 mm bed.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create an iPad Pro 11 M5 Magic Keyboard riser 252×180×40 mm in two halves, four 12 mm foot posts, 80×20 mm rear cable gap, 2.4 mm walls, each half under 220 mm.
M4 keyboard risers miss the new foot spacing. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Keychron Q1 HE magnetic wrist restA 20 mm tall wrist rest that matches a Keychron Q1 HE (about 380 × 150 mm) with two 8 × 2 mm magnet pockets that line up with the case's front magnets.Keychron Q8 Max split palm restA split palm rest for a Q8 Max Alice with two 8 × 2 mm magnet pockets matching the case.Mac mini M4 HDMI and SD dongle trayA tray that sits beside a Mac mini M4 (about 127 × 127 × 50 mm) and holds an HDMI/SD dongle plus two SD cards so they do not dangle from the rear ports.IKEA ALEX desk 80 mm round grommetAn 80 mm round grommet for a drilled ALEX desk top so monitor and laptop cables drop into the drawer stack.Steam Deck 2 JSAUX dock cable combA comb that sits behind a JSAUX-style Deck 2 dock and separates HDMI, USB-C and power so they do not unplug when you grab the Deck.Garmin Fenix and Forerunner charging cable dock standA desk dock that holds the Garmin four-pin charging plug pointing upward, so a Fenix 7 (47 mm case) or Forerunner 265 (46.1 mm case) drops onto the connector…