1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Kindle Scribe 2025 folio desk easel
This is not a fixed STL. SpeakCAD generates the kindle scribe 2025 folio desk easel to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a kindle scribe 2025 folio desk easel is
A low easel that holds a Kindle Scribe (2025, about 230 × 196 × 6 mm) in its folio at 25 degrees for note-taking, with a 198 mm ledge and a 10 mm pen well along the right. A 14 mm USB-C cutout sits at the bottom, and the back stay folds on a 6 mm pin. Print ledge and stay in PLA.
2022 Scribe easels are 8 mm too narrow. In SpeakCAD you measure the folio, preview the easel in the browser without paying, then download the STL.
Example prompt
Model a Kindle Scribe 2025 easel with a 198 mm ledge at 25 degrees, 10 mm pen well, 14 mm USB-C cutout, 6 mm folding stay and 2 mm walls.
People also search
kindle scribe 2025 stand stlkindle scribe easel 3d printscribe 2025 folio standkindle scribe desk easel 3d model
Questions people ask about a kindle scribe 2025 folio desk easel
A low easel that holds a Kindle Scribe (2025, about 230 × 196 × 6 mm) in its folio at 25 degrees for note-taking, with a 198 mm ledge and a 10 mm pen well along the right. A 14 mm USB-C cutout sits at the bottom, and the back stay folds on a 6 mm pin. Print ledge and stay in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Kindle Scribe 2025 easel with a 198 mm ledge at 25 degrees, 10 mm pen well, 14 mm USB-C cutout, 6 mm folding stay and 2 mm walls.
2022 Scribe easels are 8 mm too narrow. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
NuPhy Air75 V3 tenting feetA set of 8 degree tenting feet that replace Air75 V3 stock feet, 20 × 10 × 8 mm with the official pin.Studio Display USB-C hub shelfA 18 mm shelf that hangs from the Studio Display's rear Thunderbolt cable and holds a USB-C hub so Ethernet and SD do not hang off the single upstream port.IKEA KALLAX cube 50 mm cable passA 50 mm pass-through for a KALLAX cube used as a printer or game stand so power can exit the back without a raw hole.Framework 16 speaker-module stand feetFeet that lift a Framework 16 8 mm when the speaker modules are in so the down-firing drivers clear a desk.Samsung Galaxy Z Flip 6 desk stand for Flex modeA desk dock for the Samsung Galaxy Z Flip 6 that cradles the lower half so the phone sits in Flex mode with the top screen angled toward you for video calls…iPad mini 7 bedside reading standA bedside stand that holds an iPad mini 7 (about 195 × 135 × 6.3 mm) at 40 degrees in portrait with a 14 mm USB-C slot and a 8 mm lip so a Folio case does no…