Apple Watch Series 10 charger dock for nightstand
A compact dock that holds the Apple Watch magnetic charging puck (27.9 mm diameter, about 6 mm high) at 70 degrees so a Series 10 in either 42 or 46 mm charges on its side and shows Nightstand mode. The puck presses into a 28.3 mm pocket with a 3.5 mm side exit for the cable, a 20 mm gap below the puck lets the strap hang open or closed, and the 60 x 50 mm base has a channel so the cable leaves from the back. Walls are 2.5 mm and it prints upright without supports.
The watch puck varies slightly between the USB-C fast charger and older Lightning versions, so downloaded docks can be loose. In SpeakCAD you say which puck and watch size you own, preview the dock free in the browser, change the angle or add an Apple Watch Ultra clearance in the chat, then download the STL.
Model an Apple Watch charging dock with a 28.3 mm diameter, 6 mm deep puck pocket tilted 70 degrees, a 3.5 mm cable exit slot, a 20 mm strap clearance gap under the puck, a 60 x 50 x 10 mm base with a rear cable channel and 2.5 mm walls.