1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
MacBook Pro 16-inch M4 Pro vertical stand
This is not a fixed STL. SpeakCAD generates the macbook pro 16-inch m4 pro vertical stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a macbook pro 16-inch m4 pro vertical stand is
A vertical stand for a 16-inch MacBook Pro M4 Pro (about 16.8 mm closed, 356 mm wide) with a 18 × 358 mm slot, a 24 mm MagSafe cutout and a 160 × 110 mm base. Print in two PETG halves with 2.4 mm walls so a 2.1 kg Pro does not rock.
A 14-inch dock is too short and tips. Describe the case you use in SpeakCAD, preview the stand in the browser at no cost, then download the STL.
Example prompt
Design a MacBook Pro 16 M4 vertical stand: 18×358 mm slot, 24 mm MagSafe cutout, 160×110 mm base, two PETG halves, 2.4 mm walls.
People also search
macbook pro 16 m4 stand stl16 inch macbook pro vertical dock 3d printmacbook pro 16 m4 pro holdermacbook pro 16 clamshell stand 3d model
Questions people ask about a macbook pro 16-inch m4 pro vertical stand
A vertical stand for a 16-inch MacBook Pro M4 Pro (about 16.8 mm closed, 356 mm wide) with a 18 × 358 mm slot, a 24 mm MagSafe cutout and a 160 × 110 mm base. Print in two PETG halves with 2.4 mm walls so a 2.1 kg Pro does not rock.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a MacBook Pro 16 M4 vertical stand: 18×358 mm slot, 24 mm MagSafe cutout, 160×110 mm base, two PETG halves, 2.4 mm walls.
A 14-inch dock is too short and tips. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Kindle Scribe 2025 folio desk easelA low easel that holds a Kindle Scribe (2025, about 230 × 196 × 6 mm) in its folio at 25 degrees for note-taking, with a 198 mm ledge and a 10 mm pen well al…Airspy HF+ Discovery desk standA stand that holds an HF+ Discovery at 20 degrees with SMA clearance and a 14 mm USB slot.Thunderbolt 5 dock MacBook under-standA 30 mm stand that lifts a closed MacBook Air or 14-inch Pro and hides a Thunderbolt 5 dock (about 200 × 80 × 28 mm) underneath so the single cable is the on…IKEA MALM desk under-cable trayA tray that screws under a MALM desk (about 140 or 151 cm) and holds a power strip plus laptop brick so cables are not on the floor.Under-desk headphone holder with screw mountA curved hanger that screws to the underside of a desk so headphones hang within reach.Elgato Stream Deck XL low-profile angled standA single-piece stand that replaces the tall stock cradle of the Elgato Stream Deck XL with a slimmer 30 degree wedge.