1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
MacBook Air M4 USB-C hub under-clamshell tray
This is not a fixed STL. SpeakCAD generates the macbook air m4 usb-c hub under-clamshell tray to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a macbook air m4 usb-c hub under-clamshell tray is
A 18 mm tray that sits under a closed MacBook Air M4 and holds an Anker or Anker-style 6-port hub so HDMI and SD do not hang off the left side. 180 × 70 mm. Print in PETG.
A hub on the desk walks when you plug in. In SpeakCAD you name the hub, preview the tray in the browser for free, then download the STL.
Example prompt
Create a MacBook Air M4 hub tray 180×70×18 mm with a 70×25 mm hub well, 1.6 mm PETG.
People also search
macbook air hub tray stlmacbook air m4 dongle holder 3d printmacbook clamshell hub standair m4 usb-c hub tray 3d model
Questions people ask about a macbook air m4 usb-c hub under-clamshell tray
A 18 mm tray that sits under a closed MacBook Air M4 and holds an Anker or Anker-style 6-port hub so HDMI and SD do not hang off the left side. 180 × 70 mm. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a MacBook Air M4 hub tray 180×70×18 mm with a 70×25 mm hub well, 1.6 mm PETG.
A hub on the desk walks when you plug in. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
IKEA LACK side-table cable clipA clip that grabs a LACK side-table apron (about 50 mm) and parks a lamp cable so it does not show from the sofa.Samsung The Frame soundbar gap shimA shim that sits between a The Frame (2024/2025) and a soundbar so the Slim Fit Cam still sees the room.Kindle Paperwhite desk reading stand with USB-C cable slotA reclining stand that holds a Kindle Paperwhite (176.7 x 127.6 x 7.8 mm for the 2024 model, 174.2 x 124.6 x 8.1 mm for the 2021) at 60 degrees for hands-fre…Whoop 5.0 battery pack nightstand dockA nightstand dock that holds a Whoop 5.0 battery pack (about 29 × 22 × 8 mm) on its contacts with a 30 × 23 mm well 6 mm deep and a 4 mm USB-C slot at the back.Teenage Engineering OP-1 Field standA low stand that holds an OP-1 Field at 12 degrees with a 14 mm USB-C slot and 3 mm side lips so it does not slide.Apple Pencil Pro MagSafe pair trayA tray that parks an Apple Pencil Pro and a USB-C Pencil side by side with 9 mm saddles and a 12 mm cap well.