1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Pixel 10 Pro desk stand with USB-C passthrough
This is not a fixed STL. SpeakCAD generates the pixel 10 pro desk stand with usb-c passthrough to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a pixel 10 pro desk stand with usb-c passthrough is
A low desk cradle for a Google Pixel 10 Pro (about 153 × 72 × 8.5 mm) that holds the phone at 55 degrees with a 14 mm rear slot so a USB-C cable stays plugged in. The well is 74 × 10 mm with 0.4 mm clearance, 3 mm fillets on every contact edge, and a 20 mm thumb cutout so you can lift the phone without peeling a case. The base is 110 × 80 mm, 2 mm thick, and prints in one piece on its back in PLA.
Pixel 9 stands leave the Camera Bar hanging off the lip. Tell SpeakCAD the case thickness you use, preview the cradle in the browser at no cost, ask for a wireless-charger cutout in the chat, then download the STL.
Example prompt
Design a Pixel 10 Pro desk stand 110×80×70 mm with a 74×10 mm well at 55 degrees, 0.4 mm clearance, a 14 mm USB-C passthrough at the back, a 20 mm thumb cutout, 3 mm contact fillets and 2 mm walls.
People also search
pixel 10 pro stand stlgoogle pixel 10 desk stand 3d printpixel 10 pro charging cradlepixel 10 usb-c stand 3d model
Questions people ask about a pixel 10 pro desk stand with usb-c passthrough
A low desk cradle for a Google Pixel 10 Pro (about 153 × 72 × 8.5 mm) that holds the phone at 55 degrees with a 14 mm rear slot so a USB-C cable stays plugged in. The well is 74 × 10 mm with 0.4 mm clearance, 3 mm fillets on every contact edge, and a 20 mm thumb cutout so you can lift the phone without peeling a case. The base is 110 × 80 mm, 2 mm thick, and prints in one piece on its back in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Pixel 10 Pro desk stand 110×80×70 mm with a 74×10 mm well at 55 degrees, 0.4 mm clearance, a 14 mm USB-C passthrough at the back, a 20 mm thumb cutout, 3 mm contact fillets and 2 mm walls.
Pixel 9 stands leave the Camera Bar hanging off the lip. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Garmin Forerunner 970 bedside charger standA small bedside stand for a Garmin Forerunner 970 (about 47 mm) that holds the watch on its clip charger at 25 degrees so the display is readable from the pi…Arturia MiniLab 3 angled feetReplacement rear feet that put a MiniLab 3 at 8 degrees, 20 × 12 × 10 mm with the stock 4 mm pin.Magic Trackpad 2 angled desk wedgeA 8 degree wedge under a Magic Trackpad 2 / USB-C Trackpad (about 160 × 115 mm) so the front edge matches a Magic Keyboard.Dyson Corrale HS07 charger dockA dock that holds a Dyson Corrale HS07 (about 45 × 32 mm closed) on its magnetic charger so the plates do not rest on the glass.Bose Smart Ultra soundbar cable combA comb that sits behind a Smart Ultra soundbar and separates HDMI eARC, power and optical so they do not knot.Mouse bungee with weighted baseA desk accessory that lifts a wired mouse cable off the mat so it never snags or drags.